623 reviews analysed
1. MICTUNING M0810-T-LLBB LED Push Switch with Connector Wire Kit for Toyota – Blue LED LIGHT BAR Symbol
Feature
- PERFCT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car or truck
- HIGH QUALITY – Etched directly onto the switch face using modern high tech engraving equipment to ensure long image life (This one is Blue. White & Green avaiable)
- STURDY DURABILITY – Black hard surface rocker, made out of heavy duty ABS plastic, surface size 1.54″ x 0.83″
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install
- WIDE APPLICATION – This model fits on LATE model Toyota’s vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase
Description
MICTUNING Customized Symbol LED Backlit Push Button ON/OFF Switch
This NEW high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on all LATE model Toyota’s vehicles, such as FJ Cruiser, Fortune and so on, also compatible with some other model cars. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!
It has a face surface size of 1.54″ x 0.83″ and all symbols are Etched directly onto the switch face using modern high Tech engraving equipment to ensure long image life. These high quality PUSH BUTTON SWITCHES feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MICTUNING New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!
NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.
COMPATIBLE VEHICLES:
# Toyota FJ Cruiser 2007-2015
# Toyota Fortuner 2005-2014
# Toyota Hilux 2005-2014
# Toyota Tacoma 2005-2011
# Toyota Tacoma 2012-2015 (Left Side ONLY)
# Toyota Highlander 2001-2007
# Toyota Tundra 2005-2007 (Center Console if equipped)
# Toyota 4Runner 2003-2009
# Toyota Prado 120 Series 2003-2009
# Toyota Land Cruiser 100 Series 1998-2007
# Toyota Land Cruiser 75, 76, 78 & 79 series
2. MNJ Motor LED Light Switch with Connector Wire Kit for Toyota – LED LIGHT BAR Symbol -White
Feature
- PERFECT APPEARANCE: Built in two premium LED emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
- ESAY INSTALL: This Toyota LED switch rated at 3Amp 12V, comes with connector wire kit, this led lights switch fits on Toyota Sequoia 2008-ON, Toyota Highlander…
- UNIQUE DESIGN: This LED light bar rocker switch is SPST designed(Single Pole Single Throw) on-off switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights fit in the OEM space available in your car or truck
- STURDY DURABILITY: Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life (This one is White LED)
- LONG WARRANTY: We always put the customer service for the highly place,So we will give 1 year warranty to our customer.Hope can bring you the friendly purchase experience.If you have any question please feel free to contact us.
Description
MNJ Motor LED Backlit Push Button ON/OFF Switch for Toyota
This high quality 12 volt push switch allows you to operate ANY 12 volt accessories. It fits on all LATE model Toyota’s vehicles, such as FJ Cruiser, Fortune and so on, also compatible with some other model cars. It has short circuit protection to protect your vehicle(s). The switch is made out of heavy duty ABS plastic that will ensure years of service and come in a mate black surface color, the SAME color as the OEM Switches!
It has a face surface size of 1.54″ x 0.83″ and all symbols are Etched directly onto the switch face using modern high Tech engraving equipment to ensure long image life. These high quality LED rocker switch feature a backlit panel that illuminates when the switch is turned on. There are 2 LEDs UPPER/ LOWER. 1 LED constant backlit, 1 LED ON when set to ON position. MNJ MOTOR New High Quality 12 volt Push Switch will give you a clean and original style look, they are install in the existing holes that come with the vehicle!
COMPATIBLE VEHICLES:
# Toyota FJ Cruiser 2007-2015
# Toyota Fortuner 2005-2014
# Toyota Hilux 2005-2014
# Toyota Tacoma 2005-2011
# Toyota Tacoma 2012-2015 (Left Side ONLY)
# Toyota Highlander 2001-2007
# Toyota Tundra 2005-2007 (Center Console if equipped)
# Toyota 4Runner 2003-2009
# Toyota Prado 120 Series 2003-2009
# Toyota Land Cruiser 100 Series 1998-2007
# Toyota Land Cruiser 75, 76, 78 & 79 series
NOTE: The switch is an electronic switch rated at 3 Amp. Therefore in ALL cases the accessory MUST be wired through a fused relay.
3. Nilight LED Light Bar Rocker Switch 5Pin Laser On/Off Rear Lights Rocker Switch 20A/12V 10A/24V Switch jumper wires set,2 years Warranty
Feature
- Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light.
- Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark.
- Sturdy and durable: made of high-quality plastic and well-conductive pins
- laser-etched pattern, not easy to fade away.
- Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc.
- Package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams
Description
Beauty and fashion Nilight 5 pin rocker switch is a SPST designed (single pole single throw) on-off switch with illuminated LEDs, you can easily turn on or off the lights as you like. The surface cover is streamline curved design with laser-etched patterns onto it. Built-in LED light emits soft light to light up the pattern when the switch is powered on. You can easily find the illuminated sign in a dark environment, no need to fumble for the switch in the dark anymore. Application: the switch fits into common square holder panel housing for most car, Jeep, 4X4, SUV, ATV, UTV, motorcycle, boat, Wrangler and other off-road vehicles. Rated at 20A 12V DC and 10A 24V DC, it is usually used together with wiring harness to control the LED light fixtures of many kinds of vehicles, such as LED light bar, LED work lights, Fog lamps, driving lights, headlights, taillights, off road lights, etc. After-sales service: 2 years warranty and professional customer service any questions, please feel free to contact us.
4. A/C Air Conditioning Control Switch Knob Button For Toyota Tacoma 2005-2015
Feature
- 100% Brand New and Good Quality.
- Nice Decoration: The interior ring allows light to shine through from the dashboard, more beautiful in darkness.
- Made of high quality aluminium alloy and plastic material, durable, dirt-proof and stylish. Non-slip design & feel good with its sensual enjoyment.
- Easy to install, you can install by yourself, just take out the original knob, then insert the new one.
- Fitment:For Toyota Tacoma 2005-2015
Description
Material: Aluminium & Plastic
✔Fit for: Toyota Tacoma
✔NOTE: Please ensure that the picture matches your own dashboard before purchase.
✔Package Included: 1 X set Heater Control Buttons (3 pcs)
5. AC Climate Control Knob – Set of 3 – Replaces 55905-0C010, 559050C010 – Fits Toyota Tundra 2000, 2001, 2002, 2003, 2004, 2005, 2006 – Air Conditioner Replacement Switch
Feature
- REPLACEMENT AC/HEATER KNOBS SET OF 3 – enables you to control various functions of your air conditioning or heater system like the fan speed, the temperature and the airflow of your truck. It is a common replacement for your Toyota Tundra whose AC control knobs usually break or crack over time due to frequent use.
- FITS THE FOLLOWING VEHICLES – 2000 – 2006 Toyota Tundra, including years 00, 01, 02, 03, 04, 05, 06 | The AC control knobs are located at the center of your dashboard under your radio instrument and can be installed easily with no tools needed at all. Just plug it right in once the old one has been removed.
- REPLACES PART# 55905-0C010, 559050C010 found on the popular Toyota Tundra Models with years 2000-2006. This AC Knob Set is a direct replacement for Toyota part# 55905-0C010. Each of the knobs can be fitted in any of the AC functions of your truck.
- OEM FIT, QUALITY, FINISH – This AC Knob Set features an improved plastic material to insure it lasts longer than the factory part. While this is NOT a genuine Toyota part, it is a direct replacement and it will appear, fit and work like the factory part.
- LIFETIME WARRANTY – This AC Knob Set comes complete with a lifetime warranty. If the part ever fail on your Toyota Tundra simply contact us for a replacement. Save hundreds of dollars from parts and labor and take advantage of our lifetime warranty.
6. MICTUNING Backlit FOG LIGHTS Symbol Push Button with Wiring Kit ON-OFF Switch for Toyota (Blue, Surface Size 1.28 x 0.87 inches)
Feature
- PERFECT FIT – This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your Toyota car. Gives your vehicle upgraded with this factory look switch
- HIGH QUALITY – Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a backlit panel that illuminating when the switch is turned on. There are 2 LEDs inside the switch: UPPER Symbol/ LOWER Letters. Easy for you to know the working status
- STURDY DURABILITY – The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.28″ x 0.87″. It has short circuit protection to protect your vehicles, ensure years of service. Safe and long lasting
- EASY INSTALL – Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the battery, the red w/yellow stripe closest to green wire goes out to the relay
- the black wire connects to the ground, while the red w/yellow stripe closest to black goes to the dash
- WIDE APPLICATION – The switch fits on most model Toyota¡¯s vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase. COMPATIBLE VEHICLES: # Toyota Sequoia 2008-ON, # Toyota Highlander 2008-ON, # Toyota Tacoma 2012-ON (Center ONLY), # Toyota Tundra 2008-ON, # Toyota 4Runner 2010-ON, # Toyota RAV4 2008-2012, # Toyota Yaris 2008
7. Scion OEM Style Rocker Switch (used for: Scion tC xB xA, Toyota 4Runner FJ Cruiser Celica Matrix Tacoma Tundra Landcruiser, Nissan Frontier, Lexus IS300 SC300 SC400) – Without Light – On/Off
Feature
- INDICATE THE STATUS OF CIRCUITS WITH EASE: The light on the switch lights up when switch is ON. Featuring a unique flush mount bezel, our Scion OEM Style Lighted Rocker Switch looks great on any panel.
- FITS PERFECTLY IN THE SWITCH “BLANKS” OF YOUR: Scion tC (2005 – 2010), Scion xB 1st gen, Scion xA, Lexus IS300, Lexus SC300 &
- SC400, 96-02 Toyota 4Runner (sorry doesn’t fit 03+), Toyota Celica (7th gen, 2000+), Toyota Matrix (1st gen), Toyota Tacoma (1st gen), Toyota Tundra (1st gen), Toyota Landcruiser (all), 05-09 Nissan Frontier
- VIRTUALLY INDESTRUCTIBLE: Crafted from a very durable plastic, this switch won’t break, chip, nor rust like other switches.
- ENDLESS POSSIBILITIES: 1000’s of creative uses, whether you want to switch on LEDs in your car or truck, our high quality rocker switch is just what you need. The project ideas are endless, and we love seeing new ways our customers use this switch. Send us your application photos!
- LIFETIME GUARANTEE: We sell products that last. Our rock-solid guarantee means we’ll replace your switch if there’s ever a problem. Pass it on to the next generation with confidence.
8. MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue
Feature
- MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
- PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
- STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
- WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
- WHAT YOU’LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram
Description
Fashion Cool Illuminated Rocker Switch
MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!
It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4×4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.
Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2″ (50mm) x 1″(25mm). Standard size mounting hole 1.41″(36mm) x .86″(22mm).
Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.
CAUTION:We recommend professional installation, pls let professional installer to install the switch by following the wiring diagram included; If let the wire short circuit, it would caught a wire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit and test it after all wire hooked well.
Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram
9. ESUPPORT Car Blue Red Green Yellow LED Fog Light Toggle Rocker Switch 4Pin 12V 35A ON OFF Bright Rear Front
Description
1.Fog Light Switch with LED
2.Terminals: 4
3.Universal fitting, will fit most cars
4.Panel cut-out diameter: about 20 x 31mm
5.Overall dimensions: about 42 x 22 x 38mm (H x W)
6.Switch rating: 35A 12V DC
7.Material: plastic, metal
Package Include:
1 x Blue LED Fog Switch
1 x Red LED Fog Switch
1 x Green LED Fog Switch
1 x Yellow LED Fog Switch
10. MICTUNING Blue ROCK LIGHTS Rocker Switch Kit- On/Off Blue LED Light 20A 12V
Feature
- MICTUNING 5 Pin on-off Rocker Switch is SPST designed(Single pole single throw) switch, it come along with a set of jumper wires, simple to install, can easily turn on/off the lights
- PERFECT APPEARANCE: built in two premium LEDs emits cozy beam, penetrating to surface cover that illuminates the patterns, no longer fumble for the switch but clearly see it at the dark
- STURDY DURABILITY: made of strengthened plastic and well-conductive pins, and all patterns are etched directly onto the switch surface to ensure long lasting durability
- WIDE APPLICATION: standard 5 Pin switch, rated at 20amp/12v and 10amp/24v, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, Fog Lamps, Headlights, Taillights and Auxiliary Lamps, etc
- WHAT YOU’LL GET: 1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Package included : 1x 5 Pin Rocker Switch,1x jumper wires set, 1x Diagram
Description
Fashion Cool Illuminated Rocker Switch
MICTUNING 5 Pin rocker switch is a SPST (Single Pole Single Throw) on-off switch that works like a seesaw, easily turning on or off any lights. Its surface cover is designed to be streamline curved with etched patterns. Built-in LED light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles!
It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends. The whole switch fits into a standard square cut out same as all the other switches for most 4×4, Polaris RZR, Off-road, SUV, ATV, UTV, Polaris Ranger RZR, Motorsport, Boat, Marine, Jeep Wrangler, etc.
Rated at 20Amp 12V/DC and 10Amp 24V/DC, it is mainly used for controlling the LED light fixtures of car, boat and yacht, such as led light bar, headlights, tail lamps, work lights, fog lights, auxiliary lights and so on. Surface size is 2″ (50mm) x 1″(25mm). Standard size mounting hole 1.41″(36mm) x .86″(22mm).
Warranty
1 YEAR QUALITY GUARANTEE for Genuine MICTUNING 5 Pin Rocker Switch and Lifetime Friendly Customer Service.
Package included :
1x 5 Pin Rocker Switch
1x Jumper wire set
1x Diagram
Conclusion
By our suggestions above, we hope that you can found Toyota Switches For Dash for you.Please don’t forget to share your experience by comment in this post. Thank you!
![MICTUNING [New] LED Push Button Switch with Connector Wire Kit for Toyota - White Laser Etched LED LIGHT BAR Symbol](https://images-na.ssl-images-amazon.com/images/I/61X2tGVjnbL._SL300_.jpg)
![MICTUNING [New] LED Push Button Switch with Connector Wire Kit for Toyota - White Laser Etched LED LIGHT BAR Symbol](https://images-na.ssl-images-amazon.com/images/I/61X2tGVjnbL._SL1000_.jpg)
