Top 9 Resdential Hydronic Heating

0
612 reviews analysed

1. Supply Giant QGS-S341000 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 3/4 in. x 1000 Feet, RED, 3/4 Inch

Supply Giant QGS-S341000 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 3/4 in. x 1000 Feet, RED, 3/4 Inch

Feature

Description

Product Description

Supply Giant Oxygen Barrier PEX Tubing (EVOH) is used for residential and commercial radiant heating system applications. It keeps oxygen along with other elements from infiltrating and corrupting the key mechanical components in heating systems. Strong and flexible cross-linked polyethylene tubing with exceptional temperature and pressure ratings that exceed expectations for plumbing projects in hydronic radiant heating applications. Commonly used in medium to large size radiant floor heating projects as well as for baseboard and radiator heating systems. The hydronic tubing system was designed to be the most efficient snow melting system for outdoor use on concrete ground. This also provides additional benefits of freeze protection by expanding and contracting its tube that is resistant to breakage. The tubing can withstand temperature aging with longer life expectancy and exceptional maintenance free performance. For optimal leak free water flow connections, the tubing system works with cinch clamps seal accessories ensuring continuous performance. Made using a “Silane” or “Moisture Cure” method. PEX Tubing is marked every 5 Feet and conforms with ASTM F876, ASTM F877, CSA B137.5, NSF 14, NSF-RFH & ASTM standards.

From the Manufacturer

Pex Tubing 3/4 Inch x 1000 Feet for Potable Water – Red (color-coded to identify hot and cold water installations)

2. Rinnai RL Series HE+ Tankless Hot Water Heater: Indoor Installation

Rinnai RL Series HE+ Tankless Hot Water Heater: Indoor Installation

Feature

Description

Color:RL75iN – Natural Gas/7.5 GPM

Product Description

non-Condensing Tankless Water Heater

From the Manufacturer

Stop planning your mornings and evenings around your water heater. Set your own schedule, thanks to the R75LSi. Ideal for two- to three-bathroom homes, the R75LSi delivers up to 7.5 gallons of hot water per minute (GPM), while saving energy and money. Mount your compact R75LSi in virtually any room, and vent directly to the outside with a single wall or roof penetration.

3. Pexflow PFR-R1300 Oxygen Barrier Pex tubing, 1 Inch, RED

Pexflow PFR-R1300 Oxygen Barrier Pex tubing, 1 Inch, RED

Feature

Description

Size:1 Inch |  Style:300 Feet

Product Description

Pexflow Oxygen Barrier PEX Tubing (EVOH) is used for residential and commercial radiant heating system applications. It keeps oxygen along with other elements from infiltrating and corrupting the key mechanical components in heating systems. Strong and flexible cross-linked polyethylene tubing with exceptional temperature and pressure ratings that exceed expectations for plumbing projects in hydronic radiant heating applications. Commonly used in medium to large size radiant floor heating projects as well as for baseboard and radiator heating systems. The hydronic tubing system was designed to be the most efficient snow melting system for outdoor use on concrete ground. This also provides additional benefits of freeze protection by expanding and contracting its tube that is resistant to breakage. The tubing can withstand temperature aging with longer life expectancy and exceptional maintenance free performance. For optimal leak free water flow connections, the tubing system works with cinch clamps seal accessories ensuring continuous performance.

Made using a “Silane” or “Moisture Cure” method. PEX Tubing is marked every 5 Feet and conforms with ASTM F876, ASTM F877, CSA B137.5, NSF 14, NSF-RFH & ASTM standards.

Note: Can be used for cold water system, but not potable water.

From the Manufacturer

Pex Tubing 1 Inch x 300 Feet for Potable Water – Red (color-coded to identify hot and cold water installations)

4. Supply Giant QGS-S12100 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 1/2 in. x 100 Feet, RED, 1/2 Inch

Supply Giant QGS-S12100 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 1/2 in. x 100 Feet, RED, 1/2 Inch

Feature

Description

Product Description

Supply Giant Oxygen Barrier PEX Tubing (EVOH) is used for residential and commercial radiant heating system applications. It keeps oxygen along with other elements from infiltrating and corrupting the key mechanical components in heating systems. Strong and flexible cross-linked polyethylene tubing with exceptional temperature and pressure ratings that exceed expectations for plumbing projects in hydronic radiant heating applications. Commonly used in medium to large size radiant floor heating projects as well as for baseboard and radiator heating systems. The hydronic tubing system was designed to be the most efficient snow melting system for outdoor use on concrete ground. This also provides additional benefits of freeze protection by expanding and contracting its tube that is resistant to breakage. The tubing can withstand temperature aging with longer life expectancy and exceptional maintenance free performance. For optimal leak free water flow connections, the tubing system works with cinch clamps seal accessories ensuring continuous performance. Made using a “Silane” or “Moisture Cure” method. PEX Tubing is marked every 5 Feet and conforms with ASTM F876, ASTM F877, CSA B137.5, NSF 14, NSF-RFH & ASTM standards.

From the Manufacturer

Pex Tubing 1/2″ x 100 Ft. for Potable Water – Red (color-coded to identify hot and cold water installations)

5. Ecosmart ECO 18 Electric Tankless Water Heater, 18 KW at 240 Volts with Patented Self Modulating Technology

Ecosmart ECO 18 Electric Tankless Water Heater, 18 KW at 240 Volts with Patented Self Modulating Technology

Feature

Description

Style:ECO 18

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

6. Supply Giant QGS-S12300 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 1/2 in. x 300 Feet, RED, 1/2 Inch

Supply Giant QGS-S12300 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 1/2 in. x 300 Feet, RED, 1/2 Inch

Feature

Description

Product Description

Supply Giant Oxygen Barrier PEX Tubing (EVOH) is used for residential and commercial radiant heating system applications. It keeps oxygen along with other elements from infiltrating and corrupting the key mechanical components in heating systems. Strong and flexible cross-linked polyethylene tubing with exceptional temperature and pressure ratings that exceed expectations for plumbing projects in hydronic radiant heating applications. Commonly used in medium to large size radiant floor heating projects as well as for baseboard and radiator heating systems. The hydronic tubing system was designed to be the most efficient snow melting system for outdoor use on concrete ground. This also provides additional benefits of freeze protection by expanding and contracting its tube that is resistant to breakage. The tubing can withstand temperature aging with longer life expectancy and exceptional maintenance free performance. For optimal leak free water flow connections, the tubing system works with cinch clamps seal accessories ensuring continuous performance. Made using a “Silane” or “Moisture Cure” method. PEX Tubing is marked every 5 Feet and conforms with ASTM F876, ASTM F877, CSA B137.5, NSF 14, NSF-RFH & ASTM standards. Note: Can be used for cold water system, but not potable water.

From the Manufacturer

Pex Tubing 1/2 Inch x 300 Feet for Potable Water – Red (color-coded to identify hot and cold water installations)

7. SUPPLY GIANT HO11 Oxygen Barrier Pex tubing, 1 Inch, Red

SUPPLY GIANT HO11 Oxygen Barrier Pex tubing, 1 Inch, Red

Feature

Description

Product Description

Pexflow Oxygen Barrier PEX Tubing (EVOH) is used for residential and commercial radiant heating system applications. It keeps oxygen along with other elements from infiltrating and corrupting the key mechanical components in heating systems. Strong and flexible cross-linked polyethylene tubing with exceptional temperature and pressure ratings that exceed expectations for plumbing projects in hydronic radiant heating applications. Commonly used in medium to large size radiant floor heating projects as well as for baseboard and radiator heating systems. The hydronic tubing system was designed to be the most efficient snow melting system for outdoor use on concrete ground. This also provides additional benefits of freeze protection by expanding and contracting its tube that is resistant to breakage. The tubing can withstand temperature aging with longer life expectancy and exceptional maintenance free performance. For optimal leak free water flow connections, the tubing system works with cinch clamps seal accessories ensuring continuous performance.

Made using a “Silane” or “Moisture Cure” method. PEX Tubing is marked every 5 Feet and conforms with ASTM F876, ASTM F877, CSA B137.5, NSF 14, NSF-RFH & ASTM standards.

Note: Can be used for cold water system, but not potable water.

From the Manufacturer

Pex Tubing 1 Inch x 100 Feet for Potable Water – Red (color-coded to identify hot and cold water installations)

8. PEXFLOW PFR-R121000 Oxygen Barrier PEX Tubing for for Hydronic Radiant Floor Heating Systems, 1/2 Inch, Red

PEXFLOW PFR-R121000 Oxygen Barrier PEX Tubing for for Hydronic Radiant Floor Heating Systems, 1/2 Inch, Red

Feature

9. Supply Giant QGS-S38300 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 3/8 in. x 300 Feet, RED, 3/8 Inch

Supply Giant QGS-S38300 PEX Tubing, Oxygen Barrier for Hydronic Radiant Floor Heating Systems 3/8 in. x 300 Feet, RED, 3/8 Inch

Feature

Description

Product Description

Supply Giant Oxygen Barrier PEX Tubing (EVOH) is used for residential and commercial radiant heating system applications. It keeps oxygen along with other elements from infiltrating and corrupting the key mechanical components in heating systems. Strong and flexible cross-linked polyethylene tubing with exceptional temperature and pressure ratings that exceed expectations for plumbing projects in hydronic radiant heating applications. Commonly used in medium to large size radiant floor heating projects as well as for baseboard and radiator heating systems. The hydronic tubing system was designed to be the most efficient snow melting system for outdoor use on concrete ground. This also provides additional benefits of freeze protection by expanding and contracting its tube that is resistant to breakage. The tubing can withstand temperature aging with longer life expectancy and exceptional maintenance free performance. For optimal leak free water flow connections, the tubing system works with cinch clamps seal accessories ensuring continuous performance. Made using a “Silane” or “Moisture Cure” method. PEX Tubing is marked every 5 Feet and conforms with ASTM F876, ASTM F877, CSA B137.5, NSF 14, NSF-RFH & ASTM standards. Note: Can be used for cold water system, but not potable water.

From the Manufacturer

Pex Tubing 3/8 Inch x 300 Feet for Potable Water – Red (color-coded to identify hot and cold water installations)

Conclusion

By our suggestions above, we hope that you can found Resdential Hydronic Heating for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general