Top 9 Laptop Harddrive Sata 3

1. Not support 3.5” SSD & HDD!

3. Not support IDE interface!

The Sabrent EC-DFLT SATA Lay-Flat Docking Station supports the direct insertion of Desktop 2.5″/3.5″ SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps!

Features:

The USB 3.0 to SATA/IDE Hard Drive adapter enables you to transfer files up to 5 Gbps! Connect any 2.5″ and 3.5″ SATA/IDE hard drives and 5.25″ SATA/IDE CD/DVD-RW drives. Power switch to easily connect and disconnect your hard drive.This Adapter is a perfect solution for data transfers or data backup!

Features:

• Supports 2.5″ and 3.5″ SATA/IDE hard drives

• Supports 5.25″ SATA/IDE CD/DVD-RW drives

• Super-Speed USB 3.0 interface

• Plug & Play, Hot-Swappable

• LED indicator light

System requirements:

• Windows

• Mac OS

Package contents:

• USB 3.0 to SATA/IDE adapter

• Power Adapter

• Power Cord

• User Manual

Feature:

1. Super-Speed USB 3.0 interface, Reverse compatible with USB 2.0 and USB 1.1. LED lights indicate Power and Activity status.
2. On/Off Switch for HDD protection, can be switched off when not in use, easy and simple operation, efficiently enhances lifespan of your devices it can protect your HDD.
3. Support Standard Desktop 3.5″ SATA or IDE Hard Drives, Standard Notebook 2.5″ SATA or IDE Hard Drives, Desktop CD-ROM/CD-R/CD-RW/DVD-ROM/DVD+RW.
4. Hot-swappable, plug and play, no drivers needed.
5. The USB SATA Adapter is a caseless solution that makes swapping hard drives easier than ever before. Transfer data quickly and easily through USB 3.0 at speeds of up to 5Gbps.

System Requirements:
– Available USB port on the computer.
– Windows: 2000/XP/Vista/7/8/8.1/10 (Both 32-bit and 64-bit versions).
– Mac OS X.

Package Include:
1x USB 3.0 to IDE/SATA Adapter
1x USB 3.0 CABLE
1x 4PIN Power Cable
1x 12V/3A Power Adapter
1x User Manual

Product Description

Apricorn’s SATA Wire 3.0 is the easiest way to upgrade your notebook drive. Packaged with our user-friendly Cloning Software and using an ultra-fast USB 3.0 connection for up to 10x faster data transfer rates than USB 2.0, you can clone your notebook drive in a snap. If your notebook is running out of space or you are looking to upgrade to a faster high performance hard drive or solid state drive, Apricorn’s SATA Wire is the perfect tool. Providing a USB 3.0 connection to ANY 2.5 inch notebook hard drive or solid state drive and bundled with Apricorn’s Upgrade Suite Software, the SATA Wire enables you to upgrade your notebook’s drive in three simple steps. Connect the SATA Wire to your drive and to the USB 1. port on your computer Run the included EZ Gig IV or ShirtPocket cloning 2. software to copy all of your data, email, settings and OS from your notebook to the new drive Swap out your old notebook drive with your new 3. one, and you’re done. EZ Gig IV Cloning software is a powerful, yet easy to use tool that gives you the option of creating an exact clone of your hard drive – perfect for hard drive upgrades or for creating bootable backups of your system. Or for those who wish to clone to a smaller capacity drive, such as fast solid state drive, EZ Gig’s Data Select option enables you exclude selected media files from the copying process to save space. Now you can run your OS and applications from a fast, smaller SSD boot drive, while keeping your documents and media files on your original hard drive. The SATA Wire is also perfect for transferring data to bare drives or for creating backups of your system. Now there’s no excuse when it comes to backing up or upgrading your system, just use Apricorn’s SATA Wire.

From the Manufacturer

Apricorn’s SATA Wire 3.0 is the easiest way to upgrade your notebook drive. Packaged with our user-friendly Cloning Software and using an ultra-fast USB 3.0 connection for up to 10x faster data transfer rates than USB 2.0, you can clone your notebook drive in a snap. If your notebook is running out of space or you are looking to upgrade to a faster high performance hard drive or solid state drive, Apricorn’s SATA Wire is the perfect tool. Providing a USB 3.0 connection to ANY 2.5 inch notebook hard drive or solid state drive and bundled with Apricorn’s Upgrade Suite Software, the SATA Wire enables you to upgrade your notebook’s drive in three simple steps. Connect the SATA Wire to your drive and to the USB 1. port on your computer Run the included EZ Gig IV or Shirt Pocket cloning 2. software to copy all of your data, email, settings and OS from your notebook to the new drive Swap out your old notebook drive with your new 3. one, and you’re done. EZ Gig IV Cloning software is a powerful, yet easy to use tool that gives you the option of creating an exact clone of your hard drive – perfect for hard drive upgrades or for creating bootable backups of your system. Or for those who wish to clone to a smaller capacity drive, such as fast solid state drive, EZ Gig’s Data Select option enables you exclude selected media files from the copying process to save space. Now you can run your OS and applications from a fast, smaller SSD boot drive, while keeping your documents and media files on your original hard drive. The SATA Wire is also perfect for transferring data to bare drives or for creating backups of your system. Now there’s no excuse when it comes to backing up or upgrading your system, just use Apricorn’s SATA Wire.

The Sabrent SATA Hard Drive Docking Station enables you to access desktop or laptop hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2.5"/3.5" SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files. Plus you can swap out hard drives effortlessly with plug and play mounting. Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps.

To use Hard Drive Offline Clone Function:
1. Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
2. Make sure that the USB cable is disconnected from your computer.
3. Connect power supply and switch on power.
4. Hold down the CLONE button, release when you see a Blue LED.
5. Then quickly press the CLONE Button.
6. A Blue LED will flash on 25% indicating that the cloning process has begun.
7. The cloning process is complete when ALL the lights turn solid Blue (25%-100%).
8. Finally press the power switch to the OFF position and eject your drives.

System requirements:
• Windows
• MAC: OS

Package Contents:
• Docking Station
• Power Supply
• USB 3.0 cable
• User Manu