Top 10 Hurricane Panel

Product Description

Ideal for attaching storm panels to wood, concrete and masonry

From the Manufacturer

Ideal for attaching storm panels to wood, concrete and masonry

Hurricane Kit contains quality products designed to provide hassle-free operation and ideal for numerous applications. The handy 2 piece kit includes wing nut driver and a 18-20” slotted power bit with a ¼” hex shank.

QUALITY.

The washered wing nuts are made of zinc die cast, this will protect them from rust and corrosion and ensure the durability and longevity of the product.

PURPOSE.

The HighWind Solutions by Mountwell Hardware washered wing nut can be used in many applications.

It is great to use with hurricane panels and shutters that utilize the “F” track design and also with anchored bolts .

INSTALLATION.

Installation is simple. With the wide wings, you can simply install and tighten by hand.

To ensure the proper installation we recommend using the available wing nut driver.

This will not only make the job faster but will also ensure that the panels are on securely.

**Only tighten panels to the manufacturers specifications.**

THE MOUNTWELL HARDWARE GUARANTEE

We take pride in our product quality and craftsmanship and all of our products are backed by our 100% money back guarantee.

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Using Window Clips To help ease the process and to cut time, there is a product available that can make boarding easier and more effective: HURRICANECLIP window clips. Some facts about window clips:Available in a variety of economical package sizes and quantities.Clips securely attach to 1/2″ plywood which the fits into exterior window casings. No special tools, caulking, adhesives or glue required. Install and remove with one person.Clips create rigid, safe, temporary attachment of plywood to brick, wood, or stucco window casings. No nails, screws, bolts or brackets will permanently damage your property.Clips require no drilling into your home or window casingsClips hold plywood sheets in window casings as well or better than any hardware available today.Clips are rugged and will last year after year. If you move, take them with you. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows.

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

These Hurricane Board-Up Clips are constructed of stamped steel and come in a zinc-plated finish. They are designed for fast and secure board-ups over windows on brick, wood and stucco surroundings that are sufficiently recessed in from the exterior finished surface, with 90-degree right angle surfaces adjacent to the windows for them to work. These clips help provide swift shielding of windows from high winds and dangerous airborne debris. Installation instructions are provided for use with 1/2 in. thick plywood, to include mounting and removal for storage and future use. Kindly refer to the Wind Speed Chart for proper count and spacing of clips to be used, based on wind speed and overall window sizes. The chart covers window sizes ranging from 24 to 96-inches wide, and for wind speeds up to 110-150mph. , all depending on overall window size opening.

PAGOW 2 Pack Upgraded 7.5mm/0.3 inch Large Slotted Hurricane Wingnut Driver – Wing Nut Drill Bit Socket Tool, 1/4″ Hex Shank for Panel Wing Nuts, Screws Eye C Hook & Q-Hanger, Steel

Function

This wingnut driver is designed to tighten or loosen wing nuts, bolts, light hanger hooks quickly and effectively when installing hurricane shutters/panels or other DIY projects like Christmas lights,string lights etc, which saves lots of your time and gets the job done more faster.

Dimensions

Length: 78mm(3.1 inch);
Outer Diameter: 24mm(1 inch)
Drill bit slot is 7.5mm(0.3 inch) wide

Suitable for Q shaped light hanging hooks up to 4mmHow To Use

Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

100% Customer Service Satisfaction

If you have anything concerned with the wing nut driver, please first to choose contact us and we will take care of it for you.here is how Find your order in your amazon account, click the ” contact seller” button beside the order ID.