The Best Goulds 1 4 Hp Submersible Pump

compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

The J7 is specifically designed for homes farms cottages and booster services. Its Convertible design may be used on shallow or deep well applications using appropriate fittings.This pump features a back pull-out design two compartment motor for easy access to wiring nozzle clean out plug in shallow well adapter and is corrosion resistant. Volts: 115/230, amps: 14.8/7.4

1HP, 115V/60HZ/1PH, 7 stage, 33 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4” NPT discharge.
Warning: This is 110V pump! Using 220V will burn the pump!
Specifications:
* 4″ deep well submersible pump. 1 HP, 115V, 10.3 Amps, 7 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9, or MA0459X-14;
* Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Built in check valve included.
* Submersible design creates quiet operation
* Unique design reduces its noise.
* 207 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* User’s manual included and installation tape kit included.
* Warranty: 12 months limited manufacturer’s warranty

1HP, 230V/60HZ/1PH, 7 stage, 33 GPM Max, 207 feet head, Mid Intake, S.S. SHELL C.I Intake, 1-1/4” NPT discharge.
Warning: This is 220V pump!

Specifications:
* 4″ deep well submersible pump. 1 HP, 230V, 5.1 Amps, 7 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides high flow up to 33GPM, and 207 ft. Head. That is greater than almost all other 1 HP well pumps.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* High efficient and hermetically sealed motor has a built in capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Built in check valve included.
* Submersible design creates quiet operation
* Unique design reduces its noise.
* 207 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* User’s manual included and installation tape kit included.
* Warranty: 12 months limited manufacturer’s warranty

Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼” NPT suction, 1″ NPT discharge, 1″ NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140°F Pressure regulator included. Pumps are manufacturer tested and may contain water inside from such testing

The J10 is specifically designed for homes farms cottages and booster services. Its convertible design may be used on shallow or deep well applications using appropriate fittings. This pump features a back pull-out design two compartment motor for easy access to wiring nozzle clean out plug in shallow well adapter and is corrosion resistant. Volts: 115/230, Amps: 16.2/8.1

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

Nothing deflates a player’s enthusiasm faster than a deflated ball. Whether it’s a soccer ball, football or basketball, a leak or a puncture, relying on the Franklin ball maintenance kit is a smart way to keep players focused and in the game. Keep this maintenance set on the sidelines for easy access, so you can use it right when you need it. Be sure to inflate your sport balls to their proper air pressure settings.

This ball maintenance kit is great for use in schools, on the court or field, or even at home, so every sports ball will feel like new with every dribble or throw. Don’t play a game without a handy, complete maintenance set by your side! Order today and get everything you need, including a convenient carrying case for storing your inflating set.