Finding your suitable readers for cooling wirewound power ceramic is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cooling wirewound power ceramic including detail information and customer reviews. Let’s find out which is your favorite one.
798 reviews analysed
1. Electronics-Salon 100W 16 OHM Audio Power Amplifier Test Dummy Load, Non-inductive 100 Watts Resistor.
2. Aluminum Housed Resistor, Purple-fox 2pcs Aluminum Shell Chassis Screw Tap Mounted 50W 5% Case Wirewound Transducer Resistor (3 ohm)
Feature
- Product name: aluminum Housed resistor
- Casing material: aluminum
- color: Green
- power Rating: 50W
- Aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment.
- Small size, high power load, standard and non-inductive winding types.
- High insulating capacity, good performance in vibration.
- Multiple connection modes, easy to install. Widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry.
Description
Product Name : Aluminum Housed Resistor;
Resistance Value : 3 ohm;Power Rating : 50W
Resistance Tolerance : ± 5% (J);Body Size : 49 x 15mm/ 1.9″ x 0.59″ (L*D)
Mounting Hole Diameter : 3.4mm/ 0.13″;Total Size : 72 x 22 x 15mm/ 2.8″ x 0.86″ x 0.59″ (L*W*T)
Weight : 49g;Package Content : 2 Pcs x Aluminum Housed Resistors
Aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment.
Small size, high power load, standard and non-inductive winding types.
High insulating capacity, good performance in vibration.
Multiple connection modes, easy to install. Widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry.
3. TOUHIA Aluminum Case Resistor 50W 1 Ohm Aluminum Housing Wirewound Resistors Screw Tap Chassis Mounted – Pack of 2
Feature
- Package Content – 2pcs x Aluminum Case Resistors
- Aluminum housing for heat dissipation. Standard and non-inductive winding types, small size, high power load
- 50 Watt and 1 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range
- Aluminum case has the screw tabs on it so you can tighten them against a chassis or heat sink for greater heat dissipation. Suitable for cooling plate installation
- High insulating capacity, good performance in vibration. Multiple connection modes, easy to install
- Suitable For Inverter, LED lights, Speakers, Frequency Divider, Servo Industry And Other Industrial Control
Description
Specification:
Casing Material: Aluminum
Power Rating: 50W
Resistance Value: 1 Ohm
Tolerance: 5%
Working voltage: 220V
Max. overload voltage: 220V
Body Size: 49.2x16x15/1.93″x0.63″x0.59″(L*W*H)
Lead Size: 10mm/0.39″
Mounted Hole Size : 1.8mm/ 0.07″, 3.5mm/ 0.14″
Package included: 2 x Wirewound Resistor
ATips:
This product in the use of time, there will be heat phenomenon.
Do not touch the outside of the resistor directly by hand when the resistor is in operation for a long time to avoid injury.
If the resistor work for a long time, please do Heat dissipation.
After-sale service: Feel free to contact us with any product issues.
4. Aluminum Housed Resistor, Purple-fox 2pcs Aluminum Shell Chassis Screw Tap Mounted 100W 5% Case Wirewound Resistor (12 Ohm)
Feature
- Product name: aluminum Housed resistor
- Casing material: aluminum
- color: Green
- power Rating: 100W
- Aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment.
- Small size, high power load, standard and non-inductive winding types.
- High insulating capacity, good performance in vibration.
- Multiple connection modes, easy to install. Widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry.
Description
Resistance Value : 12ohm;Power Rating : 100W
Resistance Tolerance : 5% (J);Body Size : 59 x 15mm/ 2.32″ x 0.59″ (L*D)
Mounted Hole Size : 1.8mm/ 0.07″, 3mm/ 0.12″;Total Size : 81 x 21 x 15mm/ 3.2″ x 0.83″ x 0.59″ (L*W*T)
Weight : 60g;Package Content : 2 x Aluminum Housed Resistor
Aluminum housing for heat dissipation, suitable for cooling plate installation, can be used in atrocious environment.
Small size, high power load, standard and non-inductive winding types.
High insulating capacity, good performance in vibration.
Multiple connection modes, easy to install. Widely used in power supply, transducer, elevator, arena audio and high requirement equipment industry.
5. uxcell 2 Pcs Aluminum Case Resistor 10W 10 Ohm Wirewound for LED Converter with Rod Post 10W10RJ
Feature
- 10 Wattage and 10 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 10W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 3/4 inches(19mm) and two rods with 1.8mm hole for a soldering connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
6. uxcell 2 Pcs Aluminum Case Resistor 10W 300 Ohm Wirewound for LED Converter with Rod Post 10W300RJ
Feature
- 10 Wattage and 300 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 10W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 3/4 inches(19mm) and two rods with 1.8mm hole for a soldering connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
7. uxcell 2 Pcs Aluminum Case Resistor 10W 4 Ohm Wirewound for LED Converter with Rod Post 10W4RJ
Feature
- 10 Wattage and 4 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 10W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 3/4 inches(19mm) and two rods with 1.8mm hole for a soldering connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
8. uxcell 2 Pcs Aluminum Case Resistor 10W 25 Ohm Wirewound for LED Converter with Rod Post 10W25RJ
Feature
- 10 Wattage and 25 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 10W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 3/4 inches(19mm) and two rods with 1.8mm hole for a soldering connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
9. uxcell a12040600ux0286 Chassis Mounted Aluminum Housed 25W 3.9 Ohm 5% Wirewound Resistors
10. uxcell 2 Pcs Aluminum Case Resistor 10W 50 Ohm Wirewound for LED Converter with Rod Post 10W50RJ
Feature
- 10 Wattage and 50 Ohm, 5% tolerance. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range.
- Aluminum Housed. An insulated cover on the wounded wires would block out the heat, which promises the high performance of a resistor. Hence, the cooling job was achieved by aluminum case.
- This 10W resistor formed with qualified copper, nickel, and aluminum. With the compact structure and heat dissipation design, a capability of overload has been built.
- Board length 3/4 inches(19mm) and two rods with 1.8mm hole for a soldering connection.
- Reliable. Problems like the flush LED would have a perfect solution, or you can use it in any AC DC circuits, converter, inverter, motor speed control, drivers, etc.
Conclusion
By our suggestions above, we hope that you can found Cooling Wirewound Power Ceramic for you.Please don’t forget to share your experience by comment in this post. Thank you!
