Finding your suitable readers for condenser fan motor 1/3 hp 230v is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for condenser fan motor 1/3 hp 230v including detail information and customer reviews. Let’s find out which is your favorite one.
939 reviews analysed
1. Fasco D7908 5.6-Inch Condenser Fan Motor, 1/3 HP, 208-230 Volts, 1075 RPM, 1 Speed, 2.6 Amps, Totally Enclosed, Reversible Rotation, Ball Bearing
Description
Product description
Motor Type: Permanent Split Capacitor RPM: 1075 HP: 1/3 Volts: 208-230 Amps: 2.6 Hz: 60 Phase: Single Phase Thermal Protection: Automatic Speeds: 1 Rotation: Reversible Bearings: Ball Enclosure Type: Totally Enclosed (TE) Frame Size: 5.6″ Frame Motor Diameter (In.): 5.6 Motor Length (In.): 4 1/2 Shaft (In.): 1/2 X 6 1/2 Bolt Circle (In.): 5-6/32 (5.2)
From the Manufacturer
PSC motor, 4 drilled and tapped holes in the shell, all angle mount bearings, 60 Degree ambient temperature rating, 1/2-Inch x 6-1/2-Inch shaft, 7.5 mfd/370V Capacitor Needed – Not Included
2. A1729, 1/3 HP Condenser Fan Motor 1075RPM, 2.4AMP
Feature
- 1/3HP Outdoor Condenser Fan Motor, 208-230 volt, 1075 RPM, 2.4AMP
- Capacitor (not included): 7.5 MFD/370V
- Replaces: AOS Century FSE1036S, Emerson: 1861, MARS 10729, Fasco D908, GE/Genteq 3729, Packard 43729, Rheem Protech W51-13CJA1-01, Carrier RCD: P257-8729, York Source 1: S1-FHM3729
- Repair video: https://youtu.be/VxEcFCR6TkI In addition, the motor comes with drain plugs on both end-shields. If you install the motor shaft (facing) down, you need to remove the drain plug on the shaft side end-shield. If you install your motor shaft up, you need to remove the plug on the non-shaft end. This will allow moisture and condensation to drain out of the motor
- All Angle, ball bearing
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru-bolt or band mounting
- Double full flatted shaft
- Class B insulation
- Single phase, 60 hertz
- Thermal overload protected
- Fan duty, continuous, air over
- Totally enclosed non-ventilated
- 36 inch leads
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
Description
Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find it on millions of HVAC equipment including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. The Amazon venue is intended for contractors, repair technicians, and do-it-yourselfers, who otherwise many not have been adequately served with Broad-Ocean motors.
3. K55HXGDD-8119 – OEM Upgraded Emerson 1/3 HP 230v Condenser Fan Motor
Description
Condenser Fan Motor for the Outdoor A/C Unit
4. 51-100998-05 – Rheem OEM Replacement Condenser Fan Motor 208-230 Volt 1/3 HP
5. MARS – Motors & Armatures 10728 1/4hp 1075rpm, 1 Speed 1.8 Amp Outdoor Condenser Fan Motor
Description
1 speed motor; 1.8 amp; use to replace motor for other popular models; 16.7 pounds; 15 inches in length.
6. K55HXJYJ-9348 – OEM Upgraded Emerson 1/3 HP 230v Condenser Fan Motor
Description
Condenser Fan Motor for the Outdoor A/C Unit
7. Fasco D7909 5.6-Inch Condenser Fan Motor, 1/4 HP, 208-230 Volts, 1075 RPM, 1 Speed, 1.8 Amps, Totally Enclosed, Reversible Rotation, Ball Bearing
Description
Product description
Motor Type: Permanent Split Capacitor RPM: 1075 HP: 1/4 Volts: 208-230 Amps: 1.8 Hz: 60 Phase: Single Phase Thermal Protection: Automatic Speeds: 1 Rotation: Reversible Bearings: Ball Enclosure Type: Totally Enclosed (TE) Frame Size: 5.6″ Frame Motor Diameter (In.): 5.6 Motor Length (In.): 4 Shaft (In.): 1/2 X 6 1/2 Bolt Circle (In.): 5-6/32 (5.2)
From the Manufacturer
PSC motor, 4 drilled and tapped holes in the shell, all angle mount bearings, 60 Degree ambient temperature rating, 1/2-Inch x 6-1/2-Inch shaft, 5mfd/370V Capacitor Needed – Not Included
8. A1404, 1/4HP 825RPM Condenser Fan Motors
Feature
- 1/4 HP AC Condenser Fan Motor, 1-speed at 825 RPM, 208~230V, 2.2 AMP
- Capacitor (not included): 5 MFD/370V
- 36″ long leads
- Replaces: AOS Century FSE1028SF, Emerson: 1874, MARS 10404, Fasco D934, GE/Genteq 3404, Packard 40825, Rheem Protech 51-23054-13, York Source 1: S1-FHM3204
- Features: All Angle, ball bearing Rheem mounting holes w/screws installed Water slinger on shaft Thru-bolt or band mounting Capacitor requirement noted on motor label Double full flatted shaft Specifications: Class B insulation Single phase, 60 hertz Thermal overload protected Fan duty, continuous, air over Totally enclosed non-ventilated 36 inch leads Reversible rotation
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands. If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
9. 51-21853-03 – OEM Upgraded Rheem Condenser Fan Motor 1/3 HP 208-230 Volts 1075 RMP
Description
This is a Brand New OEM Upgraded Condenser Fan Motor
Conclusion
By our suggestions above, we hope that you can found Condenser Fan Motor 13 Hp 230V for you.Please don’t forget to share your experience by comment in this post. Thank you!
