724 reviews analysed
1. Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
Feature
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
2. Crossery Adhesive Mounting Disk for Car Dash Board | Phone Mount, Dashboard Cam & Smartphone Holder Suction Disc | Compatible with Garmin & Tom Tom GPS | Cell Phone & Car Accessories | 80mm 2-Pack
Feature
- ? UNIVERSAL – This semi-permanent adhesive mounting disk works with any 60mm suction mounts for adhering to dashboards. It is also compatible with Garmin and TomTom GPS mounting pedestals.
- ? PEEL & STICK – Easily apply this car accessory to your dashboard by removing the paper backing from the back of the mount disk, then placing and pressing it down on a previously cleaned surface.
- ? EASY REMOVAL – Apply a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Cut through with a long piece of dental floss until the disk is removed.
- ? LEAVES NO DAMAGE – This mounting disk won’t leave a trace when you decide to remove it after installing. While the adhesive is strong, the disk can easily be lifted without leaving any residue.
- ? DURABLE & LONG-LASTING – With a strong adhesive, this car accessory is sure to last a long time. It is also heat resistant and can stick to vertical surfaces, soft touch dashboards and windshields.
Description
Worried that your suction cup mount will damage your dash?
Your GPS and other devices are essential while driving. However, mounting pedestals can be sticky, and when placed on textured or soft dashboards, can be a cause of concern. It is recommended to use an adhesive mounting disk to ensure that your dash won’t be damaged or be left with residue once you decide to remove it.
The same goes for your suction mobile holder. Mounting your device allows you to easily and conveniently view your phone on your dashboard or even your windshield. It is best to keep these flat surfaces blemish-free by using an adhesive mounting disk.
With Crossery Adhesive Mounting Disk, you can keep your dash protected!
Universal for any 70mm smartphone, car camera or GPS suction mount, this disk adheres to the dashboard while your suction cup mount adheres to the disk. With a much larger size than your suction cup, you can ensure a secure fit.
Now, you can mount your suction mounting pedestal, including your mounting pedestals for Garmin and TomTom GPS device, to your car’s dashboard or windshield for easy viewing.
Still not convinced? These other benefits will help you decide:
? This car accessory fits any 70mm mount securely, so your pedestal won’t fall off. ? The strong adhesive ensures that your device will not drop even if it is placed on your windshield.
? The disk is compact and doesn’t take up much space on your dashboard. ? It is a practical gift for friends and family. After all, who does not have a mobile phone?
Keep your dashboard and windshield protected. Add Crossery Adhesive Mounting Disk to your cart TODAY!
3. iSaddle Adapter Plate Circular Adhesive Dash/Console Disc with 3M Adhesive Suction Cup Base For Car Dashboards Garmin TomTom GPS Smartphone Dashboard Disc(2Pcs,Diameter About 71mm)
Description
The iSaddle Rotating Car Mount Dashboard Disk has a simple, sleek and discrete design to compliment the interior of any vehicle. Effortlessly transform your dashboard into a “glass-like” surface to make it compatible with most windshield-style car mounts, GPS device mounts and any other similar device mounting systems. No tools are required to install – simply adhere to the dashboard using the strong adhesive base and your Dashboard Disk is ready to go. Equipped with a full 360 degrees of rotation, allows for optimal viewing adjustments for all drivers. Once you find that perfect viewing angle, one simple press of a button will lock the Dashboard Disk into place to keep it from moving while you’re on-the-go. With a strong-hold, adhesive base and a durable design the iSaddle 360-Degree Rotating Car Mount Dashboard Disk is the perfect addition to your vehicle.
4. Dashboard Mount Disc 70mm Diameter 3M Adhseive Dash Mounting Pad for Tom Tom Garmin Magellan GPS Suction Cup Mount Also for Dash Phone Holder – 2 Pack
Feature
- Smooth Surface Mount Disc – To provide smooth, glass-like surface for pedestals of suction cup car mounts to work more effectively. Suitable for Every Suction Mount
- Strong Sticky 3M PE Foam Pad – 3M Adhesive Tape sticks to almost all textured surfaces. *Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
- Universal Compatibility – Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
- Size: about 70 mm in diameter
- Note: Each pad is one-time use only. Once removed, it may not be reusable.
Description
Universal Compatibility
About 70mm diameter fits for almost all Garmin TomTom Magellean GPS mounting pedestals and dashboard suction phone mount.
Dashboard Mounting Instructions
1. Choose a suitable location for disk (and pedestal) installation.
Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road or hinder vehicle operation.
2. Clean the dashboard surface area thoroughly with alcohol pad to ensure dashboard is clean and free of any dashboard conditioners or other treatments.
3. Remove the paper backing of the disk and place on the cleaned surface. Press the top of the disk down firmly to allow the adhesive to stick to the surface. Allow 24 hours for the adhesive to cure to the surface before applying any pressure.
4. Place the suction cup of the pedestal (sold separately) firmly down on the center of the mounting disk and lower the securing lever.
Removal Instructions
1. Prepare the surface around the disk by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the adhesive area for about a minute.
2. Take a long piece of dental floss in each hand and slowly work back and forth at the base of the adhesive disk. Gently use the dental floss to cut the adhesive from the dashboard until the black plastic disk is removed.
3. If the sticky adhesive area breaks apart or does not come off completely, re-apply a small amount of alcohol (or adhesive removal liquid) and carefully lift off the remaining area by hand.
Note: Adhesive disk is intended for semi-permanent installation and one-time application. Once removed, it can’t be reapplied.
Package
2 * 70mm Adhesive Mounting Disk
5. Rovtop 3 Pieces Adhesive Mounting Disk for Car Dashboards Vehicles with Windshields (Medium)
Feature
- Come with 1pcs 105mm and 2pcs 75mm adhesive mounting disk
- Apply the adhesive side to the dash and the suction cup from your existing mount to the top side of the disc
- Adhesive is strong yet leaves no residue when removal is required
- Ideal for vehicles with windshields that may be hard to reach
Description
Package included:
1x 105mm Adhesive Mounting Disk;
2x 75mm Adhesive Mounting Disk
Warranty:
24-month warranty.
Note:
1.It is suggested to allow 24 hours for the adhesive to solidify before securing the base of the mount to the center of the disk
2.How to remove: Saturate the area with Medicinal alcohol or other adhesive removal product, then scrape the adhesive with a dental floss
Any questions you have, please feel free to contact us. We will get you back within 24 hours.
6. iSaddle CH02B Car Dash Dash Camera Mini 3M Double-Sided Adhesive Mount Holder Driving Video Recorder Windshield & DashBoard Mount Holder for Car DVR Camera GPS ¡
Feature
- Fits Most Popular Car Dash Cam Such Like G1W/Yi Smart Dash Cam/Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP…
- 3M Double-Sided Adhesive Mount Stands Well In Your Windshield Or DashBoard
- Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera
- Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
- Easy To Get a Customized Holder With iSaddle Mounting Kit
Description
CH02B Car Dash Dash Camera Mini 3M Double-Sided Adhesive Mount Holder Driving Video Recorder Windshield & DashBoard Mount Holder for Car DVR Camera GPS
7. Lot of 2 Dash Mount Console Discs for Garmin Tomtom Magellan GPS (70mm Diameter)
Feature
- The 70 mm round console disk can transform any windshield mount into a console dashboard mount
- The 3M adhesive is strong yet leaves no residue when removal is required
- Semi permanent adhesive mounting disc works with any 60mm suction mounting pedestal for adhering to dashboards
- Compatible with Garmin TomTom Magellean GPS mounting pedestals
- Compatible with any windshield suction cup mount for iPhone Samsung HTC LG Sony Google Motorola Android phones
Description
The 70 mm round console disk can transform any windshield mount into a console mount. The 3M adhesive is strong yet leaves no residue when removal is required.
8. VideoSecu ML531BE TV Wall Mount for Most 27″-55″ LED LCD Plasma Flat Screen Monitor up to 88 lb VESA 400×400 with Full Motion Swivel Articulating 20 in Extension Arm, HDMI Cable & Bubble Level WP5
Feature
- Heavy guage steel supports screens up to 88 lbs. compatible with VESA (mounting hole pattern) 400x400mm/400x300mm/400x200mm/300x300mm/300x200mm/200x200mm/200x100mm/100x100mm (16″x16″/16″x12″/16″x8″/12″x12″/12″x8″/8″x8″/8″x4″/4″x4″)
- Post-installation level adjustment allows the TV to perfectly level
- Tilt+15°/-5°, swivel 180 degrees and rotate for maximum viewing flexibility
- VESA plate can be taken off for easy installation by one person
- Low Profile mount retracts to 2.2″ to save space, Extends 20″ from the wall
- Standard mounting hardware,10 ft HDMI Cable and 6″ 3-Axis Magnetic Bubble Level included
Conclusion
By our suggestions above, we hope that you can found Adhesive Dash Mount Seaside Escape for you.Please don’t forget to share your experience by comment in this post. Thank you!
