The Best Msd Sunshade Shark

This street fire cdi ignition is perfect for budget minded enthusiasts. The ignition offers capacitive discharge technology and will fire a series of multiple sparks that lasts for 20 degree of crankshaft rotation when the engine is running under 3,000 rpm this ensures combustion and produces great throttle response and smooth idle. The cdi is built around a durable cast aluminum housing and easily connects to points, amplifiers and magnetic pickup distributors. There’S also an adjustable rev limiter. Protection.

MSD is excited to announce the next generation of 6-series ignition controls the 6AL-2. The all new ignition control combines a new housing, new digital controls and more power in a sleek package. Inside the new cast aluminum housing you’ll find an advanced micro-controller that manages the timing and RPM of the ignition. The spark output of the new box has been turned up to 535 V of primary voltage with spark energy reaching up to 135millijoules. The multiple sparks of the 6AL-2 burn in the cylinder for 20 degrees of crankshaft rotation to ensure complete combustion. Two more great features are the rev limits. There are two rev limiters; one for high end overrev protection and another you can activate off a clutch or trans brake to set a launch limit. This feature will help your car blast off the starting line. Adjustments are made via four rotary dials for 100 RPM increment control.

Ignition Control Programmable 6AL-2 MSD Ignition

The MSD 6AL Ignition Control set the standards that other ignitions strive to reach. In fact, you’ll find ignitions from other companies that carry the 6AL name (and in some cases, the same part number). MSD raised the bar even higher with the revised Digital 6AL Ignition Control! The wiring of the Digital 6AL is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The rev limiter of the 6AL is located right on top of the housing for easy access to the two rotary dials to set the limit in 100 rpm increments.

Inside the Digital 6AL you’ll find a microprocessor that monitors and controls every firing and rev limit. The circuits are updated with efficient components that help the ignition produce more power while drawing less current! In fact, the Digital 6AL delivers over 530 volts to the coil with up to 135mJ of spark energy for every firing! Increased output combined with MSD’s proven multiple spark series is a win-win situation!

The Digital 6AL is supplied with the wiring harness and the components you’ll need for installation. The 6AL is also supplied with vibration mounts. Both ignitions are compatible on 4, 6 or 8-cylinder engines with 12-volt, negative ground electrical systems. They’ll accept trigger inputs from breaker points, amplifiers and magnetic pickups.

If you’re looking to improve the performance of your modified mill, we have the answer. Whether you’ve done a cam swap, or bolted on a carb, intake and headers… the 6A is a surefire way to harness all the ponies under your hood.

The Digital 6A is a microprocessor controlled, capacitive discharge ignition that multi sparks up to 3,000 RPM providing easy starts, a clean, smooth idle and quick throttle response by optimizing your engines efficiency. Above 3,000 RPM, a single spark stays lit for up to 20⁰ of crankshaft rotation ensuring a complete burn of the air / fuel mixture in every cylinder.

A sealed, locking connector keeps the minimal wiring of the 6A tidy for a clean installation in all applications. It can be run on 4, 6 and 8 cylinder engines with a 12 volt negative ground electrical system and can be triggered with breaker points, an electronic amplifier or magnetic pickups.

Manufacture: 

MSD customizable sunshade is made for all types of automobile, sedan, SUV, minivan, and pick-up truck; also suitable for home and office windows. 

• Make a perfect personalized gift by adding Family or Pet Photo!
• Promote your business by adding your Business Logo and Business Name or Slogan!
   

Each order includes 2 pcs of car sun shade. 

Protection from harmful UV rays and sun glare, prevents interior from getting too hot. 

Soft polyester material make it easy for storage. When it’s not sunny, simply fold and twist to store in your bag or glove compartment, quick, easy and simple to use! Amazing image design would sure make your car stands out.

Disclaimer: 

Please be noted that the photo may slightly differ from the actual item in terms of color, due to the lighting during photoshoot or monitor display.

After-sales Services: 

1. 30 days warranty by MSD. Free return of or replacement within supported if defective.
2. “Your satisfaction is our highest priority”. If you have any problems about this product or your order, please feel free to contact us.

Contact Us: Log in Amazon account > find the order > click “Get help with order > choose specific subject > click Ask Seller.

MSD is excited to announce the next generation of 6-Series ignition controls – the 6AL-2! The ignition control combines a new housing, new digital controls and more power in a sleek package. Inside the new cast aluminum housing you’ll find an advanced micro-controller that manages the built-in two step rev-limiter. The spark output of the new box has been turned up to 535 volts of primary voltage with spark energy reaching up to 135 millijoules! The multiple sparks of the 6AL-2 burn in the cylinder for 20 degrees of crankshaft rotation to ensure complete combustion.

Two more great features are the rev limits! There are two rev limiters; one for high end overrev protection and another you can activate off a clutch or transbrake to set a launch limit. This feature will help your car blast off the starting line! Adjustments are made via four rotary dials for 100 rpm increment control!

The all new capacitive discharge ignition will easily connect to nearly any 12-volt negative ground distributor system.

The MSD 6M-2L ignition is the same as the 6M-2 with the addition of a soft-touch rev limiter. The MSD 6M2 ignition control is designed for performance marine applications where a high energy and reliable ignition is a necessity. The capacitive discharge (CD) design of the MSD produces full power sparks throughout your boat’s entire RPM range. Below 3,000 RPM, a series of multiple sparks burn in the cylinder for 20 degrees of crankshaft rotation ensuring complete combustion. Together, these sparks produce easier starting, great throttle response, more power and reduced plug fouling during idling. Weather tight connectors with multi-ribbed seals are used to make the electrical connections to the 6 m 2. These connectors securely lock together to provide reliable connections that are unaffected by water, oil, gasoline and most other chemicals associated with boats. To protect the 6M-2’s electrical circuitry from marine conditions, the entire unit is potted with a Ciba polyurethane compound.

Manufacture:

MSD Windshield Sun Shade has one-of-a-kind image design, so you can roll in style.

• Universal Fit that works well on most vehicles. Fits any coupe, sedan, hatchback, SUV, minivan, or truck.
• Can be place vertically or horizontally to fit more windshield sizes.
• Each order consist of 2 pcs of sun shade.
• Made with soft polyester material with metal frame. Dimension: 33″ x 28.5″
• Maintain the appearance and integrity of your vehicle’s interior. Protect interior of your car from harmful UV rays, prevent damages on carpet, leather, and upholstery.
• Effectively block sun glare and harsh UV rays. Keep the interior comfortably cool when tempurature outside is on the rise. Say goodbye to searing dash board and scorching steering wheel.
• Easy placement and storage.
  – For placement, attach shade to the clip on the suction cup to place on windshield.
  – For storage, simply twist the 2 diagonal corners of the shade and fold.

Disclaimer:

Please be noted that the photo may slightly differ from the actual item in terms of color, due to the lighting during photoshoot or monitor display.

After-sales Services:

– 30 days warranty by MSD. Free return or replacement if item is damaged or defective.

– Your satisfaction is our highest priority! If you have any problems regarding this product or your order, please feel free to contact us.

Contact Us: Log in Amazon account > find the order > click “Get help with order > choose specific subject > click Ask Seller.

Product Description

The 6 bum is ideal for engines with a turbo or supercharger. Not only will the engine benefit from MSD’s full power cd sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation. When your turbo or blower forces the air/fuel mixture into the engine, the cylinder pressure inside the combustion chamber increases. The result is a great increase in power but this can also lead to detonation that can result in severe engine damage. The 6 bum lets you dial away detonation by retarding the timing in relation to the boost pressure. A dash mounted control knob lets you adjust the amount of timing retard. It can be adjusted from 0 degrees per pound of boost to 3 degrees per pound (up to 15 degrees). The 6 BTM also shares the soft touch rev control of the 6al ignition for overrev protection. The BTM is supplied with rubber shock mounts and rpm modules for 3,000, 6,000, 7,000 and 8,000 rpm.

From the Manufacturer

The 6 BTM is ideal for engines with a turbo or supercharger. Not only will the engine benefit from MSD’s full power CD sparks, but there is also an adjustable boost/timing retard circuit to prevent detonation.

When your supercharger (turbo or blower) forces the air/fuel ratio into the engine, the cylinder pressure inside the combustion chamber increases. The result is a great amount of power but this can also lead to detonation which can result in severe engine damage. The 6 BTM lets you dial away detonation by retarding the timing in relation to the boost pressure. By electronically controlling the ignition timing your engine can run on the threshold of detonation to obtain maximum power and efficiency.

The BTM features a dash mounted control knob that lets you adjust the amount of timing retard. It can be adjusted from 0° per pound of boost to 3° per pound. The boost pressure is monitored by a sensor built into the MSD.

The 6 BTM also shares the Soft Touch Rev Control of the 6AL Ignition for over-rev protection. The BTM is supplied with rubber shock mounts and rpm modules for 3,000, 6,000, 7,000 and 8,000 rpm.

NOTE: Not compatible with distributor-less systems.

NOTE: With an MSD 6 Ignition, some factory and aftermarket tachometers and fuel injection systems may require an MSD Tach/EFI Adapter.

FEATURES

• Designed for severe racing conditions
• NASCAR approved & featuring NASCAR mandated 6-pin weathertight connectors
• Circuits encased in a silicone elastomer for incredible resistance to racing vibrations
• The 6TN features the same 4-pin connector as the 6T
• The 6ALN features built-in Soft Touch Rev Limiter and four rpm modules
• Ideal for engines with a turbo or supercharger
• Convenient dash-mounted knob to adjust spark timing retard
• Includes heavy-duty rubber shock mounts
• Includes RPM modules
• C.A.R.B Approved

SPECIFICATIONS

• Operating Voltage: +10-18 VDC Negative Ground
• Current Requirements: 5 Amps-5,000 RPM, 10 Amps-10,000 RPM
• RPM Range: 15,000 RPM with 14.4 Volts
• Spark Duration: 20° Crankshaft Rotation
• Energy Output Max: 105-115 mJ Per Spark
• Weight and Size: 3 lbs, 8″Lx4″Wx2.25″H
• Voltage Output Max: Primary: 460-480 Volts, Secondary: 45,000 Volts (Blaster Coil)