Top 10 Screen Printing Vacuum Table

Product description

Holds two standard rolls up to 5 1/4″. Extra roll automatically drops into place when bottom roll is depleted. Reduces maintenance time and need for replacement. Door has tumbler lock. Spindles are heavy-duty and theft-resistant. Satin finish.

From the Manufacturer

Surface-mounted multi-roll toilet tissue dispenser shall be constructed of type-304 stainless steel with satin finish and all-welded construction

To remove concealed wall plate from back of flange and Mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage Mounting bracket onto prongs of wall plate, then secure unit into position by tightening setscrew at bottom of flange. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws furnished, or provide 1/8″ (3mm) toggle bolts or expansion bolts. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. Cap shall be 14 gauge, welded to the support arm.

Parameter:
Clamp size: 18.9″ x 2.4″ (48x6cm)
Suggest max screen frame size: 21.6″ x25.6 x 2.3″ (55x65x6 cm)
Suggest printing area: 19.6″ x 23.6″ (50x60cm)
The screen chuck shall be directly fixed on the wooden working table by self-tapping screws or fixed on the metal or wooden working table by self-tapping M8 bolts. The main body of the machine adopts advanced electrostatic spraying metal surface treatment, acid and alkali resistance, corrosion resistance, cleaning resistance, no rust, long-term use; Some parts are made of stainless steel.
The lifting height of the screen frame can be adjusted up and down 40 mm by loosening and moving elastic and hinge screws.
The lifting angle of the screen frame is adjusted 0-45 degrees by the upper and lower screws of the gravity support plate
The rubber base plate is also arranged according to the need, suitable for printing.
The gravity plate can be adjusted back and forth according to the weight of the screen plate to reach a proper balance, and the quantity of gravity plates can be increased or decreased to reach a proper balance.

Item include: A480 Desktop Screen Printing Clamp—006563

Keep your dogs’ leash and collar off the floor or table by storing them on this classic black metal leash rack. Provides 3 hooks for storage, comes with hanging hardware and measures 9″ width.