The Best 12 Hp Submersible Water Pump F

Deep Well Submersible Pump, 1/2HP, 220V/60HZ/1PH, 25 GPM Max, 150 Feet MAX, S.S. SHELL C.I Intake, 1.25 NPT discharge. Brand new product in the box! NOT ‘Manufacturer Refurbished’. We are based in the U.S., customer services, tech support & warranty are handled in the U.S.
FEATURES:
* 4″ deep well S.S submersible pump, 1/2HP, 220V, 3.3 Amps, 150 Feet MAX Head, 25 GPM Max
* Fits a 5″ or larger well casing. For 4″ casing, use pump MA0460X-9A, or MA0459X-14A;
* Patented impeller provides heavy duty higher performance and longer life than most other well pumps.
* Solid stainless steel body with heavy duty cast iron discharge
* Industrial grade heavy duty, also good for home usage.
* Built in 1/2 HP capacitor start, and thermal protection switch. For longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality UL approved motor, UL file No.: E233961
* This is a 2 wire pump with 3-Wire (2 wires + ground wire),10′ long electric cord included
* 1.25″ NPT discharge
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire).
* Submersible design eliminates the need for priming and creates quiet operation.
* High efficiency and hermetically sealed motor has thermal protection prevents overheating, uses less energy.
* 150 Max head is for open water tank. The max head will be reduced in pressure tanks. Read the ‘Selection Guide’ for details!
* Installation manual, and tape kit are included.
* Free technical support available during installation.
* Warranty: 12 months limited manufacturer’s warranty

Product Description

This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in United States.

From the Manufacturer

When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.

Product Description

331 Features: -Pump.-Perfect for boosting water pressure, draining hot water tanks and general water transfer.-Not intended for permanent installations.-0.75” Brass garden hose connectors.-Glass reinforced thermoplastic impeller.-Large prime plug with internal funnel design easy priming.-Easily replaced motor brushes.-Maximum suction lift of 180”.-Thermally protected.-Engine HP: 1/2.-RPM: 7500.-Power cord: 240”.-Maximum fluid temperature: 135 F. Color/Finish: -Durable epoxy powder coat finish. Specifications: -Include: One-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, convenient on / off switch, powerful 0.5 hp motor capable of pumping to over 1200” of head.-115 Volts / 60 Hz / 8 Amps motor. Dimensions: -Dimensions: 7” H x 4.5” W x 9.75” D. Warranty: -2-Year warranty.

From the Manufacturer

This portable pump is perfect for boosting water pressure, draining hot water tanks and general water transfer. Features include a one-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, a convenient On/Off switch, and a powerful 1/2hp motor capable of pumping to over 100-Feet of head. Not intended for permanent installations. This pump delivers up to 40-Pound of pressure, has a maximum discharge head of 105-Feet , and a maximum vertical suction lift of 15-Feet.

This All Purpose Portable Water Utility Pump Transfer kit includes 1/2 HP 1525 GPH (25.5GPM) WATER ONLY Self-Priming 120VAC 60Hz 288W 10A Pump w/ 3/4” GHT Connections, Head Lift of 40’, a 3-Prong NEMA 5-15R / NEMA 5-15P Plug, 8’ 3C/SJTW 18AWG Power Cord (MUST be plugged into a GFCI Outlet), 6’ Garden Hose, Triangle Suction Attachment, a Sturdy Handle Carry Handle & Mounting Plate.

Our Water Utility Transfer Pumps are designed to be portable & transport easily for on the go or emergency back-up applications. The body & frame are heat treat with an anti-rust finish. This pump can remove water down to an astounding 1/8”. We recommend this pump for the transfer of CLEAN CLEAR WATER at households, farms or general plumbing, also tanks, wells & flooded basements or cellars.

This SuperHandy pump comes in a very strong & durable steel frame to protect the pump during transit & the user during operation. This pump is designed for (WATER ONLY) DO NOT USE FOR GASOLINE or sewage waste or Any Other liquids other than CLEAN CLEAR WATER at a Max temperature of 77°F (25°). This Pump MUST BE PLUGGED into a GFCI PROTECTED RECEPTACLE during operation for both practical & safe operation, this pump is NOT to be used for continuous nonstop use applications.

Product Description

FLOW-MATE” SUBMERSIBLE PUMP 1/2 HP For sump/dewatering septic tank effluent Thermal overload protected Cast iron Stainless steel screws 2-pole float operated mechanical switch 1-1/2″ NPT discharge Passes 1/2″ solids 115 volt 3420 GPH at 5, 3060 GPH at 10, 2580 GPH at 15 head One year limited warranty Display carton. Make sure the pump electrical supply circuit is equipped with fuses or circuit breakers of proper capacity

From the Manufacturer

Zoeller’s Flow-Mate Model M98 Cast Iron Submersible Sump/Effluent Pump features cast iron motor and pump housing, a cast iron switch case, and a cast iron base. All castings are cast iron class 25-30 with 25000# tensile strength. The M98 also features an engineered plastic vortex impeller. The Flow-Mate has a corrosion resistant powder coated epoxy finish. There are no sheet metal parts that will rust or corrode and no screens that will clog. The permanent slip capacitor motor is oil-filled and hermetically sealed. It features automatic reset thermal overload protection. The pump also includes a watertight neoprene square ring between the motor and the pump housing. The pump’s upper and lower bearings are oil fed cast iron. The Flow-Mate’s maximum temperature for effluent or dewatering is 130 Degree Fahrenheit. The entire unit is pressure tested after assembly. The pumps screws, guard, handle, arm and seal assembly are all made of stainless steel. The Flow-Mate includes a float operated submersible (NEMA 6) 2 pole mechanical switch. It also features a carbon and ceramic shaft seal. The pump’s discharge is 1-1/2-Inch NPT. The major width of the Model M98 is 10-1/8-Inch. The major height is 12-Inch.

Product Description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 93501, 1/2 HP cast iron submersible sewage pump with tethered float switch, will pump up to 4800 gallons per hour. Equipped with 2-inch NPT discharge, will handle up to 2-inch solids and features a non-clogging vortex impeller. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

Amazon.com

From Superior Pump, this submersible sewage pump features a tethered float switch and a reliable 1/2-horsepower continuous-duty motor. Able to handle 2-inch solids, this large-capacity pump can lift water up to 25 feet and deliver flow rates up to 80 gallons per minute. Its cast iron body and non-clogging Vortex impeller ensure a long, low-maintenance life.

Submersible, non-clogging, large-capacity pump features durable cast iron housing (view larger).

Large Capacity Suited to Home and Commercial Applications

This dependable, submersible sewage pump is built to effectively handle a range of typical residential and commercial applications. Whether material is being moved from a basin to a drainage field or from a basin up to sewer or septic lines, the pump’s large discharge design easily handles 2-inch solids and high-capacity pumping. It is powerful enough to lift water up to 25 feet vertically. When used on a level plane, it can move up to 80 gallons per minute. This sewage pump delivers a maximum force of 10.83 psi.

Continuous-Duty Motor for Reliable Performance

Behind the pump’s consistent performance is a continuous-duty split-capacitor motor. This 7.6 amp, 1/2-horsepower motor operates at speeds up to 1,750 rpm and can produce 912 watts of power. It is thermally protected and rated for 180 degrees Fahrenheit (82 degrees Celsius).

Cast Iron Design with Non-Clogging Vortex Impeller

Thanks to a dependable, non-clogging Vortex impeller made of cast aluminum, as well as rugged cast iron housing and base construction, this Superior Pump unit can be trusted to withstand continuous use in tough environments. For added durability, this pump features stainless steel fasteners and a baked-on powder-coat finish. Its tethered float switch relies on a wide-angle, mechanical, pump-mounted float that’s constructed of glass-reinforced nylon.

The 10-foot, water-resistant power cord makes it easy to connect the pump to a power source. This sewage pump is UL/C-UL listed and CSA certified for safety and dependability.

What’s in the Box

93501 sewage pump

See larger image.

93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch

At a Glance

• Powerful, 1/2-horsepower continuous-duty split-capacitor motor
• Handles 2-inch solids and high-capacity pumping
• Moves up to 80 gallons per minute
• Can push water up to 25 feet vertically
• Cast aluminum, non-clogging Vortex impeller
• Durable, cast iron housing and base for long life

Product Description

A Wayne SEL50 sewage pump is an automatic pump used when water being pumped contains solids up to 2″ in diameter. A common application is pumping waste from a bathroom to a sewer or septic line.

From the Manufacturer

A WAYNE SEL50 Sewage Pump is an automatic pump used when water being pumped contains solids up to 2″ in diameter. A common application is pumping waste from a bathroom to a sewer or septic line.

Maximum Flow 72 GPM’ Off Point 3 Inches’ On Point 9 1/2 Inches, Operation Automatic, Water Flow @ 15 Feet of Head 45 GPM’ Water Flow @ 20 Feet of Head 25 GPM, Water Flow @ 5 Feet of Head 72 GPM, Shut Off 23 Feet, Maximum Solids 1/2 Inches, Top Cast Iron