Nowadays, there are so many products of 1 inch go cart clutch for 18 hp in the market and you are wondering to choose a best one.You have searched for 1 inch go cart clutch for 18 hp in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 1 inch go cart clutch for 18 hp which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
879 reviews analysed
1. MOOSUN Torque Converter Comet Clutch Go Kart Clutch 1 Inch Replaces Comet TAV2 Manco 10T 40 or 41 and 12T 35 Chain Drive Belt (1" 10T 40/41 and 12T 35 Chain)
Feature
- Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
- Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 1″(24.5mm),Driven unit: Overall Diameter 6″ (5/8″ driven pulley) ,This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions. Includes both 10t for 40/41 chain and 12t for 35 chain
Description
This kit comes with a 5/8" Driven Clutch with 6" inner Diamerer. fits all engines with a 1" Straight Crankshaft, replaces Comet, also fits Manco Go Karts, Comet 219554A.Go kart torque converters are CVT transmission systems for go karts, minibikes, small vehicles, jr, drafster, golf karts, odyssey, snowmobiles, ATVs, lawn equipment, industrial, winch and more. Torque converters and replacement parts are fully compatible with come-t and tav2 torque converters.
Technical Parameters:
Drive clutch bore: 1"(25.4mm)
Driven Clutch Bore: 16mm
Driven unit: Diameter 157mm or 6" (5/8" driven pulley)
Sprocket teeth: 10 teeth #40/41chain and 12 teeth #35 chain
Engagement range: 2350±200 RPM
Recommended engine: engines，1" shaft with flat key
Belt: Asymmetrical type
Package Content:
1 x Drive belt
1 x Plastic Assy Cover
1 x 1" Driver pulley
1 x 5/8" bore driven pulley 6" diameter
1 x Aluminum Mounting Bracket Plate
1x 12 Tooth Sprocket for #40/41and 1x 10 Tooth Sprocket for #35
1 x Full Mounting hardware Kit
This kit has everything you will need!!
Please see pictures for all that is included.
2. Bullet Lines 1" Bore 40 Series Torque Converter Driver Pulley, Fits 8-18 hp Engines, Replaces Comet 40D or 40/44 Series Pulleys 203015, for Go Kart and Golf Cart Belt Drives
Feature
- Bullet Lines 40 series torque converter driver clutch replaces Comet 40 Series Torq-A-Verter models 209133A, 209133, 2432, 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more
- Symmetrical belt inline small engine clutch that fits 1 inch Engine Shafts: Requires a 7/8 inch width Symmetrical Belt
- Worlks with 8 – 18 HP engines – Engine Engagement 1600 – 3300 RPM
- Comet 40 Series Torq-A-Verter
- Great for Go Karts and Golf Carts
Description
Bullet Lines 1″ torque converter driver replaces Comet 40 Series Torq-A-Verter models 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more
Bullet Lines 1″ 40 series torque converter driver is a symmetrical inline small engine clutch that replaces Comet 40/44 Series Torq-A-Verter models 203015A, 203015, and works with 8 – 18 hp engines within the 1600 – 3300 RPM range. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 – 1 overdirve. A torque converter acts similar to a transmission providing higher speeds, and smoother acceleration. The 40/44 series is heavily used in three wheelers, ATV’s, LTV’s, go karts, and other transportation vehicles. Commercial uses include oil well pumps, tractors, tillers, lawnmowers, construction, and industrial equipment.
This torque converter fits 8 – 18 hp engines with a 1″ shaft,1/4″ keyway, and tapped end.
Engine compatability: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.
Specifications:
The Torque Converter assembly includes:
All respective trademarks and registered trademarks appearing on this website belong to their respective owners
3. 40 Series Torque Converter Kit Clutch Pulley 1" Driver 7/8" Driven 8 to 16HP Belt replaces Comet 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and Manco 2432
Description
40 series torque converter driven clutch is a symmetrical in line small engine clutch that replaces 40D Series Torq-A-Verter models 209133A, 209133, 209139A, 209139, 209151A, 209151, and 2432. Our clutch works with 8 – 18 hp engines within the 1600 – 3300 RPM range.
Includes:
1 x 1″ Driver Clutch.
1 x 7/8″ Driven Clutch
and Belt
REPLACES COMET 40 SERIES TORQ-A-VERTER
CAN BE USED ON ENGINES WITH 8-18HP
ENGAGEMENT RANGE 1600- 3300 RPM
REPLACES:
COMET 209133A, 209133, 209139A, 209139, 209151A, 209151
MANCO 2432
No Instructions Included
4. MOOSUN 30 Series 6.5 HP Go Kart Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4" Bore 10T #40/41/420 China (Complete 3/4" Torque Converter Set)
Feature
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches, fit all engines with a 3/4 inch straight crankshaft.
- Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
- Driver clutch bore: 3/4″(16mm), Driven unit: Overall Diameter 6″ (5/8″ driven pulley) , Belt Top Width: 19mm(3/4″), Sprocket teeth: 10 teeth for #40/41/420 chain
- This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.
Description
TAV2 30 – 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go carts
Engine compatability: compatible on most engine with horizontal shaft.
Briggs / Robin / Tecumseh / Honda (and clones) / Kohler / Clinton / Lifan
Specifications:
Driver Clutch Bore: 3/4"
Driven Clutch Bore: 16mm
Driven Clutch Dia: 157mm or 6"
Sprocket: 10 teeth for #40/41/420 chain
Belt: Asymmetrical type
Belt Top Width: 19mm(3/4")
Engagement Speed: 2200±200 RPM
Recommended Engine: 2HP – 8HP engines, 3/4" shaft with flat key
Fits all engines with a 3/4" Straight Crankshaft.
This Kit Includes:
1x Drive belt
1x Driver pulley
1x Driven pulley 16mm bore 6" diameter
1x Plastic cover
1x Full mounting hardware kit
1x 10 Teeth sprocket for #40/41/420 chain(chain not included)
1x Aluminum mounting backplate
This kit has everything you will need!!
Please see pictures for all that is included.
5. Torque Converter Go Kart Clutch Set Compatible for 30 Series Manco Comet TAV2 3/4" Bore 10T #40#41#420 Chain Mini Bike Engine Kit
Feature
- Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown)
- Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4″shaft with flat key
- Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
- Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM
- however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments
- Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75
Description
Ameetaa’s go kart torque converter clutch is a replacement kits for the Comet TAV2 go-kart 30 series. This kit comes with jackshaft sprockets for the 10T #40/41/420 chain. It is made of high quality iron and aluminum, which is sturdy and durable.With this clutch,it can help you get more power out of your small engine by reducing engine load and allows higher speeds out of your small engine,smoother acceleration.
Specifications:
– Material: Iron & Aluminum
– Package Dimensions: (13.78 x 13.78 x 7.48)” / (35 x 35 x 19)cm (L x W x H)
– Weight: 11.24 lbs / 5.1 kg
– Fits: All engines with a 3/4 inch straight crankshaft
– Sprocket teeth: 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included)
– Fitment: Go Karts 30 Series
– Replacement:Comet, Predator, Manco and more
– Front Drive Clutch Bore: 3/4″(19mm)
– Rear Drive Clutch Bore: Overall Diameter 6″ (5/8″ driven pulley)
– Features:Durable, Maximum torque, Wear-resisting, Fast heat dissipation
Package Includes:
1 x Drive belt
1 x 3/4″ Driver pulley
1 x 5/8″ Driven pulley 6″ diameter
1 x Plastic Assy Cover
1 x Full Mounting hardware Kit
1 x 10 Tooth Sprocket for #40 #41 #420 chain (Chain not included)
1 x Aluminum Mounting Bracket Plate
6. 40 Series Go Kart Torque Converter Kit With Belt, Clutch Pulley Driver Driven 8 to 16 HP
Feature
- 40 Series Torque Converter Kit with Quick-Mount Backing Plate and Jackshaft
- Fits 9hp to 16hp Go Karts and Engines with a 1″ Crankshaft and 1/4″ Keyway
- Includes Driver Clutch, Driven Pulley, Belt, Cover, and Quick Mount Backing Plate With Jackshaft
- Will save you tons of time on installation!
- Replaces OEM Part Numbers 203015, 203015A, 209133A, 209133, 209139A, 209139, 209151A, 209151, 2432
Description
Brand New!
40 Series Torque Converter Kit
For 9HP – 16HP Go Karts Fits ALL 9HP – 16HP engines with a 1″ straight crankshaft and 1/4″ keyway.
You will only find this very easy to install 40 Series Torque Converter Kit here at Auto Express! No Jackshaft Required. Comes with Driver Clutch, Driven Clutch, Belt, Jackshaft and all mounting hardware attached to an easy to mount backing plate. This Kit will save you a ton of time on install!
Please look at picture in listing to see the mounting dimensions to be sure this will fit your engine. Mounting hole measurements: Between centers of holes 3 1/2″, Measured diagonally 5″
Replaces Comet 40 Series and Many Others
Replaces OEM Part Numbers:
203015, 203015A, 209133A, 209133, 209139A, 209139, 209151A, 209151, 2432
7. FDJ Minibike Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain
Feature
- Heavy Duty 10T Sprocket for 40/41/420 Chain 212cc Predator Belt Drive Centrifugal Clutch
- 3/4″ Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts
- 3 4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15″ Tall
- Fits 2 – 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200
- Fits Go Cart Motor Auto Engine Tecumseh Clutch 6.5 Horsepower Motor with 3/4″ Bar Shaft and 3/16″ Key Way
8. Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T for 35 Chain, Up to 6.5 HP, Perfect for Go Kart, Minibike and Fun Kart Engine 3/4 Bar
Feature
- Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM
- Perfect for Go Kart, Minibike and Fun Kart
- Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft
- Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
- Go Kart Clutch kit includes two set screws, but chain is not included
9. MooSun Centrifugal Clutch 3/4" Bore #35 Chain 12 Tooth for Go Karts Mini Bike Replace Parts (12T Centrifugal Clutch with #35 Chain)
Feature
- Centrifugal Clutch 3/4″ Bore 12 Tooth for 35 Chain Common clutch for 2-7 HP engines 2300±300 PRM
- Fits Honda GX160 GX200 GX140 GX120 GC160 GC190 Harbor Freight Greyhound 196cc Harbor Freight Predator 212cc
- Fit Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4″ shaft Tecumseh Engines
- Also fits any other engines with 3/4 crank shaft and 3/16″ key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands
- Go Kart Clutch kit includes two set screws and chain
Description
Centrifugal clutch designed to be used on one wheel karts with rear tires no larger than 15" tall, and engines 2hp-7hp.
Larger tires and live axles recommend using Torque-converter ( ASIN:B07T1KRS4V)
Specifications:
Clutch Bore: 3/4"
Sprocket: 12 teeth for #35 chian
Clutch Dia: 107mm
Clutch Height: 55mm
Engagement Speed: 2300±300 RPM
Recommended Engine: 2HP – 6.5HP, 3/4" shaft with flat key
Fitment:
2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200
Perfect for Go Kart Minibike Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior)
Common clutch for 3.5-7hp engines using #35 Chain
Briggs & Stratton and 2 – 6.5 HP with 3/4" Shaft
Tecumseh Engines 2 – 7 HP with 3/4" Shaft
This Kit Includes:
1 x 12 teeth centrifugal clutch
1 x #35 chain
Go Kart Clutch kit includes two set screws, but chain is not included
Recommended to always use bolt and washer on end of crankshaft to hold clutch securely onto the shaf
10. LAFORMO 1" Bore 40 Series Go Kart Torque Converter Driver Pulley Clutch Fits 8-18 hp Engines, Replaces Comet 40D or 40/44 Series Pulleys 203015, for Go Kart and Golf Cart Belt Drives
Feature
- 40 series torque converter driver clutch replaces Comet 40 Series Torq-A-Verter models 209133A, 209133, 2432, 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more
- Symmetrical belt inline small engine clutch that fits 1 inch Engine Shafts: Requires a 7/8 inch width Symmetrical Belt
- Worlks with 8 – 18 HP engines – Engine Engagement 1600 – 3300 RPM
- This 40/44 Series is heavily used in three wheelers, ATV’s, LTV’s , and Go karts
- 1 year Warranty
Description
40 Series Torque Converter Driver Clutch 1″ Bore Fits Comet 40/44
40 series torque converter driver clutch replaces Comet 40 Series Torq-A-Verter models 209133A, 209133, 2432, 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more
This torque converter fits 8 – 18 hp engines
Engagement range: 1600 – 3300 RPM
No Instructions Included
Series: 40
Driver Bore Size: 1″
Max RPM: 1600 – 3300 Range
Max HP: 8 – 18 HP
40 series torque converter driven clutch is a symmetrical in line small engine clutch that replaces 40D Series Torq-A-Verter models 209133A, 209133, 2432, 203015A, 203015. It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more. Our clutch works with 8 – 18 hp engines within the 1600 – 3300 RPM range.
HAS 1” BORE
REPLACES COMET 40 SERIES TORQ-A-VERTER
CAN BE USED ON ENGINES WITH 8-18HP
ENGAGEMENT RANGE 1600- 3300 RPM
REPLACES:
COMET 203015A, 203015.
It is also is a replacement for Kenbar 400-001, Brister, Cartco, Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more
No Instructions Included
Conclusion
By our suggestions above, we hope that you can found 1 Inch Go Cart Clutch For 18 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!
