The Best Whirlpool Dishwasher Mounting Bracket Gold Series

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

This undercounter mounting bracket for dishwashers is for solid surfaces like granite. Works with all standard size dishwashers. Can also be used on all stainless and plastic tall tub platforms.

Fit Whirlpool dishwasher perfectly, do a great job of securing the dishwasher.
If your dishwasher is not mounted to the side of the cabinet or the floor, these brackets should be added to prevent it from tipping forward when you are loading it or from vibrating during use.

8212560 Dishwasher side mounting bracket:
Replaces part numbers: 1201084, AP3953705
8269145 Dishwasher upper mounting bracket:
Replaces part numbers: WP8269145, WP8269145VP

PACKAGE LIST: 

2 x 8212560 dishwasher side mounting bracket
  4 x black installation screws
  2 x 8269145 dishwasher upper mounting bracket
  2 x silver installation screws

Practical to use: 
Compatible with various brands such as Whirlpool, Maytag, Kenmore, Amana, Crosley, Estate, Inglis, Jenn Air, KitchenAid, Magic Chef, Roper. 

Product Description

Allows mounting of dishwasher to side of cabinet.

From the Manufacturer

Allows mounting of dishwasher to side of cabinet.

Part 8269145 comes in a pack of two. Mounting brackets secure the top of the dishwasher to the underside of a cabinet or countertop. If your dishwasher moves, shakes, or tilts forward, it may be time to replace one or both of the mounting brackets. The PartsBroz 8269145 bracket set fits and performs just like the original. Use it with a variety of top name brand dishwashers.

Installation Tips

Before beginning the repair, disconnect the dishwasher from its power source. Depending on the model, you may also need to disconnect the water supply. You’ll need a pair of needle nose pliers and a screwdriver to complete the repair. Make note that brackets typically wear down at the same rate, so be sure to check both brackets and replace both if needed.

Replacing your dishwasher’s mounting brackets is a simple way to get your dishwasher running like normal.

Have any of these problems? These brackets can help:

• Door won’t latch shut
• Door won’t close
• Noisy dishwasher

Part 8269145 is a functional equivalent for part numbers: 8269145, WP8269145, AP3039168, PS393134, 830941, AH393134, and EA393134.

Compatibility

It works with top dishwasher brands and many of their models. These include:

• Whirlpool
• KitchenAid
• Kenmore
• Maytag
• Jenn-Air
• Amana
• Estate
• Magic Chef
• Inglis
• Crosley
• Roper

Please reach out to us if you have a question about compatibility. Comment below in the customer questions and answer section, or send us a message on the PartsBroz storefront. We’re happy to help ensure you select the right part number for your dishwasher.

Pair Of Black Brackets by Reyhoar – Includes 2 Black Steel Mounting Screws. Mounting brackets secure the top of the dishwasher to the underside of a cabinet or countertop. If your dishwasher moves, shakes, or tilts forward, it may be time to replace one or both of the mounting brackets. Our bracket set fits and performs just like the original. Use it with a variety of top name brand dishwashers.

Fixes the following symptoms:

Door won’t latch shut;
Door won’t close;
Noisy dishwasher.

Replaces the following part numbers:

8269145, WP8269145, WPL8269145, WPLWP8269145, WP8269145VP, AP3039168, PS393134, 830941, AH393134, EA393134, ER8269145, B00DM8KADE.

Compatible brands and models include but are not limited to:

DU1055XTSS3 GU2475XTVB0 GU2475XTVQ0 GU2475XTVY0.
KUDE20IXSS3 KUDE40FXBL3 KUDS30CXSS4
KUDE40FXBT3 KUDE40FXSS3 KUDE40FXSP3 KUDE40FXPA3 WFG381LVQ3 WFG381LVS3 KUDS30FXPA3 KUDS30CXWH4 KUDS30FXBL3
KUDE40FXWH3 KUDS30CXBL4
KUDS30FXSS3 KUDS30FXWH3 KUDS30SXWH2 KUDS30HXSS0 KUDS35FXBL3 KUDS35FXSS3 KUDS35FXWH3 KUDS30SXBL2 KUDS30SXSS2 GU2275XTVY0 GU2500XTPB0 GU2500XTPB1 GU2500XTPB3 GU2500XTPB6 GU2500XTPQ0 GU2500XTPQ1 GU2500XTPQ3 GU2500XTPS3 GU2500XTPQ6 GU2500XTPS0 GU2500XTPS1 GU2500XTPS6 GU2548XTPQ6 GU2500XTPT0 GU2500XTPT1 GU2500XTPT3 GU2500XTPT6 GU2548XTPB0 GU2548XTPQ0 GU2548XTPQ1 GU2548XTPQ3
ADB1100AWW0
MDB7749SBM0 MDB7749SBM1 MDB7749SBM2 MDBH949PAB0 MDBH949PAB1 MDBH949PAB2
ADB1100AWW1 ADB1100AWW2 ADB1100
MDBH949PAB3

Specifications:

Material: Metal
Color: Black
Product Dimensions: As the picture shows.
Quantity: 2 Pcs

Warm note:

This is not original product the mention of any related model designation above is only for purposes of demonstrating compatibility.

12-Pack undercounter dishwasher upper mounting bracket replacement and 24 installment screws, dishwasher undercounter mounting kit

Many features:
Replace part numbers: compatible with 8269145/ WP8269145, AP3039168, PS393134, 830941, AH393134, EA393134, sufficient quantity for you to replace the old or broken one.

Easy to install:
The dishwasher bracket kit can be installed quickly and easily with a screwdriver and needle-nosed pliers, saving the hassle and time.

Compatible with:
These dishwasher replacement parts compatible with Sears, Kenmore, KitchenAid, Maytag, Jenn-Air, Amana, Magic Chef and other dishwashers.

Specification:
Color: as the pictures shown
Material: durable steel
Size: 1 x 1.6 inch

Package includes:
12 x Undercounter dishwasher upper mounting bracket replacement
24 x Installment screws

Pleased note:
This is an aftermarket product (not original ), the mention of any related models and brands above is only for purposes of demonstrating compatibility.