Top 10 Desktop Hard Drive Enclosure 35

Nexstar TX 3.5″ SATA 6GB/s to USB 3.0 HDD enclosure

The Sabrent EC-DFLT SATA Lay-Flat Docking Station supports the direct insertion of Desktop 2.5″/3.5″ SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps!

Features:

The Sabrent SATA Hard Drive Docking Station enables you to access desktop or laptop hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2.5"/3.5" SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files. Plus you can swap out hard drives effortlessly with plug and play mounting. Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps.

To use Hard Drive Offline Clone Function:
1. Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
2. Make sure that the USB cable is disconnected from your computer.
3. Connect power supply and switch on power.
4. Hold down the CLONE button, release when you see a Blue LED.
5. Then quickly press the CLONE Button.
6. A Blue LED will flash on 25% indicating that the cloning process has begun.
7. The cloning process is complete when ALL the lights turn solid Blue (25%-100%).
8. Finally press the power switch to the OFF position and eject your drives.

System requirements:
• Windows
• MAC: OS

Package Contents:
• Docking Station
• Power Supply
• USB 3.0 cable
• User Manu

The Sabrent ec-dffn SATA lay-flat docking station supports the direct insertion of desktop 2.5″/3.5″ Sata hard drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the Lightning speed of USB 3.0 To quickly transfer files up to 5 Gbps!

keep your drives running cool, with built-in cooling fan
The docking station features a built-in cooling fan that provides increased reliability and lifespan to HDD by keeping the drives cooler.
* supports standard desktop 2.5″”/3.5″” Sata hard drives.
* supports hard drives up to 6TB.
* on/off power switch.
* LED light indicates power and activity status.
* hot-swappable, plug and play, no drivers needed.
* reverse compatible with USB 1.1 & USB 2.0.
* transfer rates up to 5 Gbps w/USB 3.0
* transfer rates up to 480 Mbps w/USB 2.0

system requirements:
* available USB 3.0 for high speed data transfer
* Windows: 2000/XP/Vista/7/8 (both 32-bit & 64-bit versions)
* Mac: OS X

package contents:
* Sabrent ec-dffn lay-flat docking
* power supply
* USB 3.0 cable
* user manual

The RSHTECH Lay Flat SATA HDD/SSD Enclosure supports the direct insertion of connecting to 3.5″ SATA Hard Drives. Using the most advanced ASM1153e chipset, which is the best you can get in the market!

Features:
Switch Design: Light press to turn on, long press 3 seconds to turn off power supply. Effectively protect the hard disk from damaging.
Hot-swappable: Plug and play, no drivers needed;
The SATA interface of the drive enclosure supports UASP accelerated transmission protocol (UASP requires UASP capable host system).
Made of safe and high quality ABS plastic makes this enclosure solid and sturdy.
Warm Remind:
If it happens the situation which the hard disk does not allow access，and we are providing the following suggestions:
1. You can use the other computer to see if this will happen;
2. If it is used for desktop computers, then the USB3.0 cable must be plugged in the host behind the computer interface.

Package Contents:
1x 2.5/3.5 Inch SATA Hard Drive Enclosure
1x 12V/2A Power Adapter
4x Fixed Hard Drive Screws
1x USB 3.0 Data Cable
1x Instruction Manual
Note:
– The bottom of the hard disk case is provided with a fixed 3.5 inch hard disk screw hole, and the hard disk is inserted more firmly and is more convenient to carry.
– If you need to install a 2.5″ hard drive（the screw holes will not line up on the 2.5″ hard drive）, maybe need to use something to fixed it in place. (Such as: tape)
– In order to avoid data loss, please click “Safely Remove Hardware” icon on your PC first then unplug it.
-Do not connect the enclosure to the USB port on the front panel of the desktop computer. The port on the front panel may have the insufficient power supply and cause disconnection frequently.
– LED light on the top indicates Power and Activity status.
– One-Year limited warranty.