Top 10 15 In Ectrical Cooling Fan

American Volt high performance reversible slim 12V electric cooling fan. Custom upgraded larger watt motor produces more CFM air flow volume. Fan motors are sealed to be water and dust resistant, increasing longevity. Fan is configured by default as an air puller out of the box. Blade and wiring can be reversed to make the fan an air pusher. Durably built to be shock resistant for on-road and off-road applications. Universal design for radiators, oil coolers, transmission coolers, condensers. Includes shroud mounting feet attachments and complete mounting strap kit. Browse our store for more fan sizes and thermostat switch kits. Blade Size- 9 Inch Blade Type- Curved Motor Size- 80 Watts CFM Rating- 750 RPM Rating- 2250 Amp Draw- 8 Amps Material- Plastic Shroud/Steel Motor Dimensions- 9.75″ x 9.75″ x 2.5″ thickness at center x 1.5″ thickness at edge

Specs below are for EACH fan:

6 Inch

Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 7.5″ x 6.75″ x 2.5″ center thickness & 1.5″ edge thickness

6 Inch (w/ Shroud)

Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8″ x 6.5″ x 2.5″ center thickness & 1.25″ edge thickness

7 Inch

Motor Size – 80 Watt
CFM Rating – 800
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8.5″ x 7.75″ x 2.5″ center thickness & 1.5″ edge thickness

9 Inch

Motor Size – 80 Watt
CFM Rating – 850
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 9.75″ x 9.75″ x 2.5″ center thickness & 1.5″ edge thickness

10 Inch

Motor Size – 80 Watt
CFM Rating – 900
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 11.5″ x 10.75″ x 2.5″ center thickness & 1.5″ edge thickness

12 Inch

Motor Size – 80 Watt
CFM Rating – 1400
RPM Rating – 2250
Amp Draw – 10 Amps
Dimensions – 12.5″ x 11.75″ x 2.5″ center thickness & 2.5″ edge thickness

14 Inch

Motor Size – 90 Watt
CFM Rating – 2500
RPM Rating – 2100
Amp Draw – 12 Amps
Dimensions – 15″ x 14″ x 2.5″ center thickness & 1.5″ edge thickness

16 Inch

Motor Size – 120 Watt
CFM Rating – 3000
RPM Rating – 2050
Amp Draw – 14 Amps
Dimensions – 16.5″ x 15.75″ x 3″ center thickness & 1.5″ edge thickness

Adjustable fan thermostat kit for any automotive vehicle. Probe measures liquid or contact temperature and sends power to the fan. Flexible turn-on/turn-off temperature control range of 32-248’F (0-120’C). Thermostat can be wired as a normally closed or normally open circuit.Turn-off temperature is always 15 degrees less than turn-on. Thermostat dial has both Celsius and Fahrenheit temperature markings. Probe is mounted in between radiator fins / inside water inlet.

18″ high velocity circulator, with 3 speed, 1/8 hp, 115v, 1-phase permanently lubricated, totally enclosed, psc motor.

American Volt high performance reversible slim 12V electric cooling fan. Custom upgraded 90 watt motor produces more CFM air flow volume. Fan motors are sealed to be water and dust resistant, increasing longevity. Fan is configured by default as an air puller out of the box. Blade and wiring can be reversed to make the fan an air pusher. Durably built to be shock resistant for on-road and off-road applications. Universal design for radiators, oil coolers, transmission coolers, condensers. Includes shroud mounting feet attachments and complete mounting strap kit. Browse our store for more fan sizes and thermostat switch kits. Blade Size- 10 Inch Blade Type- Curved Motor Size- 90 Watts CFM Rating- 1200 RPM Rating- 9 Amps Amp Draw- 2450 Material- Plastic Shroud/Steel Motor Dimensions- 11.5″ x 10.75″ x 2.5″ thickness at center x 1.5″ thickness at edge

Overview

A quiet cooling fan system designed to be placed on top of AV components such as receivers, routers, game consoles, and AV cabinet components. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The controller on the front of the cooling system features a smart thermostat trigger and fan speed control. The steel enclosure houses two dual-ball bearing blowers that pull heat out of the component and exhaust out the rear. The dual ball bearings also allow this fan system to be mounted horizontally or vertically. Its low-profile design enables the unit to fit in tight spaces. Includes corded power adapter to plug the fan system through an outlet.

Intelligent Programming

There are three programming settings available which includes two temperature trigger modes. The fans can also be set to run continuously or be turned off. Four fan speeds are available for each active mode and will determine the speed at which the fans run when they are triggered. This ensures optimal airflow and noise levels for your application.

Design and Construction

Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 10 pounds to be stacked on top.

OVERVIEW: This cooling unit is designed to be mounted inside your equipment cabinet or computer desk. It has a high-quality, low-noise 120mm fan, with long-lasting and quiet fluid dynamic bearings.

The system includes an adjustable thermostat, which is mounted on the inside of your cabinet. This rugged mechanical thermostat requires no maintenance or batteries to operate. It has adhesive Velcro pads on the back to make mounting and thermostat access easy.

YOU control the fan speed, using the multispeed fan controller.

THE COOLING SYSTEM INCLUDES: 1 x 120mm cabinet fan unit, 1 x adjustable thermostat, 1 x multi-speed power transformer, mounting hardware, and printed installation instructions.

SETUP:The standard system comes set up so that hot air enters the front of the fan unit (as shown with mounting plate and grills), and exits out the back. Regular Buyers: If you need to have the air coming out the front, just let us know and we will ship it that way. Prime Buyers: Since systems are shipped directly from Amazon’s warehouses, we can’t change the fan orientation on request. However, you can easily change the fan orientation later, using the simple instructions in your installation manual.

The system comes with instructions and a mounting template to facilitate installation. It comes completely assembled, with all components installed, wired and ready to go!

GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.

WARRANTY: Your purchase is also covered by a 12 month parts and labor warranty.

This 1 1/2 inch belt driven fan spacer comes with a clear anodized finish and is designed to fit most domestic 5/8 inch pilot water pumps.

Pipe mount adapter, size- 1.5 in, mounting- pipe, for use with- industrial mounted workstation fan., Manufactured in: United States Brand Name: TPI, Part Number: PM1.5, Manufacturer: TPI Corporation.

9V Battery Operated Costume Mask Cooling Fan Kit KIT INCLUDES: – 9V fan with on/off switch – 3x adhesive wire retaining clips – 2″ x 2″ square of hook and loop fastener (velcro) – 6″ x 6″ piece of mesh screen to prevent foreign objects from entering fan Fan Size: 1.55″ x 1.55″ x 0.4″ Cord length: about 9 inches

Overview

A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The LCD digital controller on the front of the system features a smart thermostat with speed control and status alerts. The steel enclosure houses three dual-ball bearing blowers that pull heat out of the component and exhausts out the rear. The dual ball bearings also allow this fan system to be mounted horizontally or vertically. Its slim low-profile design enables the unit to fit in tight spaces. On the backside are ports to connect and control additional fans. Includes corded power adapter to plug the fan system through an outlet.

Intelligent Programming

Programming includes an easy-to-use thermostat and a SMART mode that automatically adjusts the fan’s speed to react to varying temperatures. Additional features include alarm alerts, fan failure triggers, power savings setting, display lock, and backup memory. Six fan speeds are available with three screen brightness settings. Behind the unit are ports that can control up to six individual AC Infinity AIRPLATE Cabinet fans and MULTIFAN Component fans.

Design and Construction

Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.