Nowadays, there are so many products of 12v .08 amp cooling fan in the market and you are wondering to choose a best one.You have searched for 12v .08 amp cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12v .08 amp cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
917 reviews analysed
1. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
Feature
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
Description
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Notice!!!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
2. MakerFocus 4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Feature
- Oil bearing 30000 hours
- Double roller bearing 50000 hours
- Certification: CE,UL,CUL
- Temperature of usage environment: -10℃ to +70℃
- Bearing is high precision, long life and low noise
- Size: 40 mm x 40 mm x 10 mm
- Working Voltage: DC 12V
- Working Current: 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96w
- Cable length: 280mm
Description
4pcs 3D Printer Fan 12V 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR,and Other Small Appliances Series Repair Replacement
Description:
Size: 40 mm x 40 mm x 10 mm;
Working Voltage: DC 12V;
Working Current: 0.08A;
Air Flow: 5.75±10% CFM;
Power: 0.96w;
Cable length: 280mm;
Certification: CE,UL,CUL;
Feature:
Oil bearing 30000 hours;Double roller bearing 50000 hours.
Temperature of usage environment: -10℃ to +70℃;
Bearing is high precision, long life and low noise
Package Including:
4 * DC 12V 0.08A 40X40X10mm 3D Printing Fan
3. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
4. GDSTIME 60mm x 60mm x 15mm 12v Brushless Dc Cooling Fan
Description
Package include: 1pcs fan include mounting screws & nuts
Dimensions: 60x60x15mm
Connector:XH2.54-2Pin
Rated Voltage: DC:12V
Rated Current: 0.1 Amp
Rated Speed: 3600 RPM
Air flow: 22.7 CFM
Noise: 26 dBA
Bearing Type: Sleeve
Life: 35000 hours
Cable Lenght: 20cm or 7.8 inches
Weight: 30g or 1oz
5. 2packs 40mm x 40mm x 10mm 4010 12V 0.15A Brushless DC Cooling Fan 2pin AB4010M12 UL TUV
Description
Description : Model: AB4010M12 NAME:DC12V BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC10.8-13.2
Consuming Current : 0.11A(0.15 Max.)
Consuming Power: 1.32W(1.8 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6200 PRM
Iife Expectance: 70,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 25db***
DC Line Length : 100mm
Max. Air Flow: 6.86CFM
Rotation Direction: Clounter-clockwise
Size:40x40x10mm
Size:18g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
6. GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
Feature
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
7. URBEST 90mm x 25mm DC 12V 2Pin Cooling Fan for Computer Case CPU Cooler
Description
Application to car seat, computer, electrical appliances, tools, machine, units, power supply, network equipment, office equipment, lighting, shoe ark, sanitary equipment children toys, supply of heat dissipation problems, reducing equipment working environment temperature, prolong the service life of equipment. The mounting screws are not included.
8. Icstation 50mm x 50mm x 10mm 5010 2 Pin 12V 0.1A Silent Quiet DC Brushless Cooling Fan for 3D Printer Computer Case Fan (Pack of 2)
Feature
- 50x50x10 mm Quiet cooling fan, 12v, 2700-3300 RPM, 30,000h MTTF. They are durable and you don’t need to buy another small fan in the next 30,000 hours.
- Use these 23 dB cooling fans to get near-silent operation. Ideal replacement for noisy or broken 12V 5cm fans in 3D printers, DVD players, DVRs, switches, other network and storage devices, etc.
- The fans can be run 2700 to 3300 rpm by fine-tuning the fan for maximum airflow(8.5 CFM)
- You will need a battery pack/power supply that supplies 12vdc and has a capacity sufficient to provide 100ma to make the fans run. A 2.5mm pitch 2-pin connector makes it compatible with your computer motherboard or 3D printer power system.
- Please kindly contact Icstation Service Team if you received a damaged product. We provide free replacement and technology supports.
9. GDSTIME 40mm x 40mm x 10mm 6000RPM 0.08A 12V DC Brushless Cooling Fan
Feature
- Dimension of outer the frame is 40mm(L) x 40mm(W) x 10mm(H) / The size of fan in inch is 1.57in(L) x 1.57in(W) x 0.39in(H)
- The center to center distance beween the mountiong holes is 32±0.3mm/1.26in.
- Rated Voltage: DC 12V
- Rated Current: 0.08Amp
- Rated Speed: 6000 RPM
- Air flow: 6.82CFM
- Noise: 26.5dBA
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire.
Description
Operating Voltage Range：5.5V to 13.8V.
(overtake to 13.8V, it can also work.
but not safe, and seriously affects lifespan of fan.)
Operating Temperature: -10℃ – 75℃
Storage Temperature: -40℃ – 80℃
Package include:
1 x 40mm cooling fan
4*M3X16mm screws
( The fan is mounted by screws.)
10. MakerHawk 2pcs Brushless DC Cooling Fan 40mm x 40mm x 10mm 4010 12V 0.08A 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer
Feature
- Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
- Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you.
- Rated Voltage: DC 12V, Current: 0.08A
- Speed: 7200RPM, Noise: 22dBA
- Air Flow: 2.8CFM。 Dimensions: 40 x 40 x 10mm(1.6 x 1.6 x 0.36inch)
- Connector: 2 Terminal Connector with 2pin-ph2.54
- Wiring: red wire is connected to positive pole, black wire is connected to negative pole
- We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Please click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!
Description
Hydraulic fan is the fan between oil-bearing fan and ball bearing fan. It is cheap but with long life and the advantages of ultra-quiet fan. In a word, it is a highly cost-effective product.
Specification:
Model: 4010 Blower Fun
Rated Voltage: DC12V
Operation Voltage: DC7V – 12V
Consuming Current: 0.08A+5%
Consuming Power: 0.96W
Max. Air Flow: 2.8CFM
Acoustic Noise: 22dBA
Rated Speed: 7200±5%RPM
Connector: 2pin-ph2.54
DC Line Length: 300mm
Rotation Direction: Clounter-clockwise
Life Expectance: 50,000 hours at 25 degree
Size: 40x40x10mm
Screw Hole Diameter: 1.5mm
Features:
1. Hydraulic bearings are based on oil-impregnated bearings. Hydraulic bearings have a larger oil storage space than oil-impregnated bearings and have a unique loop-back oil supply circuit.
2. Improve life
3. Lubricating
4. Not easy to make noise
Polarity Protection:
1. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged)
2. When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board.
Package Including
2 * 4010 12V 0.08A Brushless DC Cooling Fan
Conclusion
By our suggestions above, we hope that you can found 12V 08 Amp Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
