The Best 10 Hp 3 Phase Motor Uj10p1dp

One Pass and Seymour L16-30P male plug and one L16-30R female connector, used for making a 30A 480V power cable. The male L16-30P plugs into a receptacle, and the female L16-30R plugs into a male plug or inlet. UL Listed

Model Number: 60KTYZ
Voltage: AC 110V
Speed: 2.5rpm
Power: 18W
Shaft Style: in center
CW/CCW (Controllable)
Motor Part Size: 60*61mm (D*H)
Synchronous gear motor operates on AC 110V. Low noise and more robust.
It is an electric motor widely used for household, hand-made, school project, model and anything else you want.

Introduction

This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.

Technical Parameters

Input voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock)
Input Frequency: 48 to 63 Hz
Output Frequency: 0 to 400 Hz
Input Phase: 1 or 3 phase as you like
Output Phase: 3 phase

Features

1.Our item adopts the Japan Mitsubish chip;
2.PID control; advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
3.Easy PLC function can realize 16 legs of speed and inverter control function;
4.RS485 communication port, adopting standard international MODBUS main circuit control;
5.With extremely strong anti-jamming capability;
6.Low output ratting torque, low speed running ability;
7.Carrier adjustable by 16KHZ, completely soundless working environment;
8.Broad voltage working area;
9.Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
10.Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes

This is a 3 phase AC generator, can be arbitrarily connected the two lines can light up the LED lamp bead.This product is suitable for the micro wind power miniature hydraulic hand friction power system, the three-phase ac hair in school Teaching AIDS model.

Specifications:
Output voltage : 3V-24V
Output current : 0.1A-1A
Rated power : 0.5-12W
Rated speed : 300-6000 rev/min

This is a great way to teach or learn about generating electricity or as an experiment starting place for larger projects.

A motor starter is for the purpose of protecting a motor that has no thermal overload protection in the motor itself. The starter consists of two devices, a contactor that completes the circuit to the motor and an overload relay that monitors the current the motor is drawing . The thermal type magnetic starter uses a device installed on the overload relay called a “heater” this is a bi-metal element that each leg of the motor goes through and comes in different ratings based on the full load amperage of the motor. While the motor is running the current flows through the heater, if the current draw of the motor exceeds the rating of the heater, the heater element heats up and causes the relay to “trip” which interrupts the contactor coil circuit and de-energizes the contactor. CA Prop 65 WARNING: Some of the products sold by Universal Pneumatic and Electric Group may contain chemicals known to the State of California, Vermont and others to cause cancer, birth defects, or other reproductive harm. It is the purchasers responsibility to determine the suitability of these products for your specific application. Including, but not limited to, using alternative products. UPE_Group shall be held harmless of any and all damages including but not limited to physical, property, water or otherwise for any reason. Your use of any information or materials on this listing is entirely at your own risk, for which we shall not be liable.